GT350 Wheel in 20"

[Need4SpeedMotors]

AG has a wheel that is similar looking 10 straight spokes forged mono block. I ordered set be a few weeks before I get them. Jason at getyourwheels has been more than patient with me too.

Thats great news ! Their multispoke forged are awesome wheels, im working on a set of the 410s for a s550 as well fitment is spot on with them.

Sponsored

 

[byklin]

For a 19x10/19x11 setup what would be the lowest offset you can run to clear the struts/brakes?

 

[Thompyt]

Whats a 410's? You are putting a shotgun caliber on them?

 

[Need4SpeedMotors]

For a 19x10/19x11 setup what would be the lowest offset you can run to clear the struts/brakes?

Based on my knowledge probably 35 or 40 fronts and 51-55 rears, the exact fitments wont be known until I start doing some inhouse engineering stuff ;) you know cant tell all my secrets now.

Whats a 410's? You are putting a shotgun caliber on them?

The Avant Garde F410 forged 3 piece concave wheels in Spec 2 sir.

Now for guns thats a different story probably meant for a different thread, but I can assure you if we compared it to guns this would be like a 20 mm shell since it would blow the competition away with what i have in mind for that car

 

[Thompyt]

Based on my knowledge probably 35 or 40 fronts and 51-55 rears, the exact fitments wont be known until I start doing some inhouse engineering stuff ;) you know cant tell all my secrets now.



The Avant Garde F410 forged 3 piece concave wheels in Spec 2 sir.

Now for guns thats a different story probably meant for a different thread, but I can assure you if we compared it to guns this would be like a 20 mm shell since it would blow the competition away with what i have in mind for that car

Thanks for the clarification. Sorry I forgot the .

Its gonna be 'spensive...

 

[Need4SpeedMotors]

Thanks for the clarification. Sorry I forgot the .

Its gonna be 'spensive...

LOL no worries pricing isnt that bad actually for a fully forged custom made wheel.

Keep in mind im the # 1 Avant Garde Distributor in Southern California, I take care of my members.

 

[byklin]

Based on my knowledge probably 35 or 40 fronts and 51-55 rears, the exact fitments wont be known until I start doing some inhouse engineering stuff ;) you know cant tell all my secrets now.



The Avant Garde F410 forged 3 piece concave wheels in Spec 2 sir.

Now for guns thats a different story probably meant for a different thread, but I can assure you if we compared it to guns this would be like a 20 mm shell since it would blow the competition away with what i have in mind for that car

I see that you're in LA area. Let me in on some secrets!
haha but in all seriousness let us know what you come up with once you can 'release' the information ;) i just really want to see how concave of a setup you can run on the s550

 

[Need4SpeedMotors]

I see that you're in LA area. Let me in on some secrets!
haha but in all seriousness let us know what you come up with once you can 'release' the information ;) i just really want to see how concave of a setup you can run on the s550

ill keep you posted

I have a vast amount of knowledge for this stuff, If you guys search the MRR 228 wheels for the Camaro, I helped MRR with finalization of design, fitment, finish and everything from A-Z !

Just need to sit with the engineers brain storm figure out the inner details for us and then Ill have some news for you guys.

I just need to make sure there is enough interest for either the 19s or the 20s if people can start letting us know on this thread along with Joe we can go from there. maybe even finish ideas as well

 

[JohnK]

How about Forgestar CF10s?

 

[Need4SpeedMotors]

How about Forgestar CF10s?

Good lightweight wheels and I carry their complete line and am one of their larger dealers in Southern California !

John did you figure out the finish you were looking for? or did you want to go more towards the custom brushed finish?

 

[carguy]

20x10 and 20x11
19x10 and 19x11
18x10 and 18x10.5

ARE ALL COMING in the form of the FF15...

20x10 pictured

 

[Need4SpeedMotors]

20x10 and 20x11
19x10 and 19x11
18x10 and 18x10.5

ARE ALL COMING in the form of the FF15...

20x10 pictured

yep sexy sexy all in one tire haha

 

[byklin]

20x10 and 20x11
19x10 and 19x11
18x10 and 18x10.5

ARE ALL COMING in the form of the FF15...

20x10 pictured

How much will the 19s cost?

 

[JohnK]

Need4speed-

I was looking seriously at the Forgestar CF10 wheels in brushed titanium but I just confirmed with Forgestar that they no longer offer the brushed titanium finish - darn! Are there any other manufacturers that would offer a similar finish?

 

[Need4SpeedMotors]

How much will the 19s cost?

They should be the same price as the FF01 wheels I believe which is $2900
However I can check with Greg to confirm for you guys.

Need4speed-

I was looking seriously at the Forgestar CF10 wheels in brushed titanium but I just confirmed with Forgestar that they no longer offer the brushed titanium finish - darn! Are there any other manufacturers that would offer a similar finish?

Ya they stopped unfortunately, I can have the same finish custom done for you if you desire on the forgestar wheels, the other option is Avant Garde wheels since we can request that finish on any of their wheels.

Sponsored