GT350 rear splash guards

[montreal ponies]

I placed them on the car and saw the area that matches the GT350 valence interfered with the premium bumper and trimmed that part off. Then held them up into position to trim the length to match the premium bumper trim and used a file to round the corner.

All of the holes lined up well. I was short a couple of plastic rivets but just re positioned the rivets that were there to secure them. Also on both sides I removed a couple of bumper bolts in the fender to secure the splash guard.

Thanks for the heads up .

Sponsored

 

[OySmallFry@SCS]

I dont see any in photos or in our dealer catalogs. There is a side skirt that comes up the fender ever so slightly.

-Benny

Do you have pricing/info on the side skirts?

 

[LevittownFordParts]

Yes as follows

MOULDING - FORD (FR3Z-6310177-AB) Left
List Price: $837.93
You Save: $269.81 (32% off)
Sale Price: $568.12

MOULDING - FORD (FR3Z-6310176-AB) Right
List Price: $838.82
You Save: $270.10 (32% off)
Sale Price: $568.72

These are paint to match meaning they will come unfinished

-Benny

 

[z06psi]

These are paint to match meaning they will come unfinished

-Benny

Lol



Sent from my SM-N910V using Tapatalk

 

[OySmallFry@SCS]

Ooooof [emoji15]
Too rich for my blood, thanks Benny

Sent from my Nexus 6 using Tapatalk

 

[LevittownFordParts]

Yeah no worries I figured that myself when researching them.

-Benny

 

[montreal ponies]

I must say that i'm a bit dissapointed in the fact that the flaps have to be trimmed in order to fit the GT's rear valance.

I was hoping they'd fit better. Guess i was wrong. Now debating what to do !!!

 

[Schu]

Awesome...

 

[Cobra Jet]

Well they're in.

Install was pretty easy. You will need 2 additional screws, clips and a push pin so maybe Benny can put together a hardware kit for those who don't have extra ones lying around like I do. I had exactly what was needed so lucky me lol.

Here is what you need

The clips and two screws are needed in the top two holes, the bottom two already has the hardware.

And the push pin is for the bottom hole


As you can see these flaps are custom textured and have a special groove for the GT350 valance to fit perfectly in to.

I do think you could make these work with a GT valance but they will not look right in my opinion. The stock valance isn't as large/wide or shaped exactly as the GT350 valance so the overall fit and finnish will look off in my opinion.

Here is a picture showing how much protection these provide. They are perfect I think and the wheel well edge of my bumper cover is already pretty beat up with only 3500 miles! They are protected now though.

Passenger side no flap

Drivers side with flap

m


And with tire in place, ahh just right!

Unless I missed it, do you have a GT rear bumper cover and valence or a GT350?

The splash guards look nice - just wondering about how much modification would be necessary to mount them to an EB Premium w/PP... ?

 

[Jmeo]

Unless I missed it, do you have a GT rear bumper cover and valence or a GT350?



The splash guards look nice - just wondering about how much modification would be necessary to mount them to an EB Premium w/PP... ?

I have a premium GT which I installed a GT350 rear valance. I believe others have modified these to fit non GT350 cars.

Jaime

Sponsored