Gt350 Manifold Help???

[15Stang5.0]

Hello I have a 2015 with the GT 350 manifold and 87MM GT 350 Throttlebody With JLT cold Air intake but having suring issues meaning when driving it freaks out got a question The manifold has a outlet needed a hose dose dose that need to be connected to the cold air intake and drill a hole cause it's very hard to drive it please comment or post pics thanks

Sponsored

 

[SoCalTim]

Say what?

 

[SoCalTim]

There is a thread dedicated to installing the GT350 manifold, with clear photos so you can compare to your car.

Take a look:

http://www.mustang6g.com/forums/showthread.php?t=53270&highlight=gt350+intake

 

[Grim12]

Hello I have a 2015 with the GT 350 manifold and 87MM GT 350 Throttlebody With JLT cold Air intake but having suring issues meaning when driving it freaks out got a question The manifold has a outlet needed a hose dose dose that need to be connected to the cold air intake and drill a hole cause it's very hard to drive it please comment or post pics thanks

Could be the tune.

This has been a common occurrence when using the GT350 TB. Some tuners have finally got it down. Other haven't.

Who did your tuning?

 

[T-S550-X]

Lund, teamjdm, and Beefcake all recommend using the the factory 80mm TB on manual cars because of surge issues. You may just put that back on to correct the issue.

 

[CEHollier]

Lund, teamjdm, and Beefcake all recommend using the the factory 80mm TB on manual cars because of surge issues. You may just put that back on to correct the issue.

Does the surge issues affect automatics?

 

[T-S550-X]

Does the surge issues affect automatics?

Not from what TeamJDM said. This is dependent on the tuner, obviously.

 

[CEHollier]

Not from what TeamJDM said. This is dependent on the tuner, obviously.

I have a Lund flex tune. I'll check with them. Anyone have an automatic with GT350 intake factory TB and Lund tune?

Sponsored