GT PP Belly

[Stang_inang_yan]

I'm wanting to get a PP chin in carbon fiber. I understand I need the PP belly. I have a GT Premium non PP.

Will the PP belly bolt in directly to the mounting holes underneath?

Who here has done this swap so far?

Sponsored

 

[zuki_dan]

I have swapped to the PP splitter. I bought the PP splitter from new take off and bought the belly pan from here:belly pan. The new take off splitter did have some damage on the under side but it is nothing that will ever be seen unless under the car.

The splitter came with extra hardware the nutplates. I also had to get 4 more large size plastic rivets to secure it completely. It uses more hardware than the base splitter. The splitter itself actually bolts to the bumper then the belly pan bolts to the splitter. The base one I removed had 1 set of hardware to secure both splitter and belly pan. I also had already bought the subframe brace for underneath that has the oil filter flap.

I also had to trim the fender liners to clear the brake cooling ducts in the new belly pan. I just traced the belly pan cut outs on the fender liners then removed the liners to trim them.