GRABBER LIME S550 MUSTANG thread

[Justin]

From this weekend, freshly cleaned. Trying to get better picture composition and angles. Entered my first photo of the month, if yall wanna go show some love ;)

Sponsored

 

[LowKey]

Avoid wide-angle as much as possible, it tends to make wheels look bigger, but distorts an already angular subject, making it look slightly bizarre. Step back a tiny bit more. Ground-level shots can look cool, just move to your left a little more and go lower. Otherwise, go slightly higher than you did in that shot. Try to find a tower somewhere or use a drone to take above shots (like my avatar). Avoid adding heavy contrast in post, and i find with grabber lime you need to bring the green levels up to reflect an accurate portrayal of the colour.

 

[Twin Turbo]

"The first customer Rspec at the Herrod Mod Shop
Monster GT 350 Brembo Ford Perfomance Brake Kit and special build 9.5 x20 and 11x20 special build Herrod Rspec integrity wheel"

 

[Twin Turbo]

 

[WD Pro]

Is that the Australian one again ?

WD

 

[Twin Turbo]

Yep, R-Spec by Herrod Performance

 

[MIKE_E]

I finally got the stripes and spoiler installed after a long wait. My wrap guy who did the full clear xpel clear coating on the car did the stripes in glass black xpel PPF. They are high gloss. It's a hugh difference from the standard vinyl stripes and will not fade. I also did some work on my backend this weekend. Tinted the taillights. I got the full Anchor tint kit and it was a big pain. I got quite some bubbles that I'm hoping that will go away. Also the Anchor tint kit was not cut very well and I had a issues getting it to fit properly. I "greened" out the mustang emblems. I was able to find some vinyl that comes close to the grabber lime color. It's not perfect but will do for now. Im thinking about going more permanent and painting them. I also made some emblems. I'm not very impressed with the lack of badging for the HPP from Ford, so I made my own and color matched rhem.ATTACH=full]483094[/ATTACH]

weekend. Tinted the taillights. I got the full Anchor tint kit and it was a big pain. I got quite some bubbles that I'm hoping that will go away. Also the Anchor tint kit was not cut very well and I had a issues getting it to fit properly. I "greened" out the mustang emblems. I was able to find some vinyl that comes close to the grabber lime color. It's not perfect but will do for now. Im thinking about going more permanent and painting them. I also made some emblems. I'm not very impressed with the lack of badging for the HPP from Ford, so I made my own and color matched rhem.

 

[Justin]

I got the stripes and spoiler installed on the after a long wait. My wrap guy who did the full clear xpel coating on the car did the stripes I'm xpel PPF. The are absolutely glass smooth and gloss. It's a high difference from the standard vinyl stripes and will not fade. I also did some work on my backend this

weekend. Tinted the taillights. I got the full Anchor tint kit and it was a big pain. I got quite some bubbles that I'm hoping that will go away. Also the Anchor tint kit was not cut very well and I had a issues getting it to fit properly. I "greened" out the mustang emblems. I was able to find some vinyl that comes close to the grabber lime color. It's not perfect but will do for now. Im thinking about going more permanent and painting them. I also made some emblems. I'm not very impressed with the lack of badging for the HPP from Ford, so I made my own and color matched rhem.

Fantastic looking car and loving the custom emblems! Most of the bubbles from my Anchor tint kit came out after some extended sun. Im sure a needle/razor and popping them would help as well. And for the taillights if all else fails you could go covers like I did! They are holding up great.

Here's my most recent mod. Need to wash her so I can show off the spoiler in a different post, but heres the new Borla S-Type Catback I installed over the weekend with my dad.

 

[Justin]

 

[Justin]

Let me know if i have to stop spamming the thread lol. She got her wash yesterday.

 

[WD Pro]

Please spam away, you know that I’m going to do exactly the same when it finally arrives ... lol

WD

 

[5-OH]

What size tires are you running front and back? That looks perfect.

 

[clebrun11]

Almost ready to pick it up from the dealer. Just waiting to get the windows tinted. I will post some more pics after I bring it home.

 

[clebrun11]

A few more pics in the shade. Still waiting to get the windows tinted. That won’t be done until the end of August.

 

[Chef jpd]

My first shoot:

20200820_132828 by chefjpd, on Flickr

20200820_142722 by chefjpd, on Flickr

20200820_143038 by chefjpd, on Flickr

Sponsored