KermiStang
Well-Known Member
Thanks for the initial answer @tj@steeda . While we wait for Robbie @Steeda UK to add in a response on the fitment of export cars, it would be helpful if you please assist with the other questions already posed, as well as elaborate on some of your response so we have a more definitive answer.I just received this info from our tech team - I apologize for the delay:
Not all magne-ride models use the extra bracket. He is referring to the bracket on each side that attaches the line to the strut. None of the after-market brake line kits that I have seen use/reuse this bracket.
As far as export cars being different, we have not seen or had our hands on an export model, so it is very difficult to say what changes have been made.
If the brake lines are installed correctly, making sure they will not contact any moving parts, they will function with no issues.
Let me know if I can help assist further - we do have Robbie in the U.K. that may be able to assist further - https://www.steeda.co.uk/
1. “Not all magne-ride models use the extra bracket”
Q. Would you please be specific? What Magnaride fitted models don’t use it? PP1, PP2, Mach1 etc. ?
2. “Then there are the different web photos on different sites of supposedly the same Steeda P/N item. (At least three different that I have seen) It’s common for this to happen with product changes etc. and various sites not using the latest updates, but some hard facts in writing with the latest photos would be nice to clear up the confusion.”
“Latest product photos, fitted and unfitted, would be nice too.”
Q. Would you please provide pictures of the latest revision of the Steeda, (P/N: 555 6027) unfitted and fitted?
Thank you
Sponsored