Front Splitter

[trafficman337]

Good Morning Everyone,

I have a 2019 GT350 on order. I have just sold a 2012 GT500 and the front splitter was close when I backed into my garage. Close to "bottoming out" or "dragging" on the driveway as I made my into the garage. Can someone tell me what the measurement is from the bottom of the splitter to the ground on a level surface? Any help would be awesome. Thanks!

Sponsored

 

[TaraFirma]

I’ll be home in a couple of hours and measure if you don’t get an answer before then. I can tell you that in stock ride height, my GT350 is much lower than my GT500 was. If I don’t enter my driveway at a 45 degree angle, I’ll scrape the splitter.

 

[s2ms]

I get 4-1/16", stock setup.

 

[autobahnGT350]

With 30 series Michelin PS4; 305 up front and 325 out back, a little more than 3 1/2 under the front splitter. Stock was way better height.

 

[trafficman337]

Thanks everyone! I guess I have some work to do!!!!!

 

[dboz1983]

Anyone have any idea how much clearance you gain by removing the front splitter? The approach to my garage for storage is a 7.7 degree angle, Ford literature states that an angle of no more than 7 degrees is required for clearance. Trying to figure out if leaving the splitter off during its initial storage will buy me enough clearance that I don’t scrape

Sponsored