Forscan Sync3 conversion help

[FamilymanGT]

Hey guys, I have researched and tried many things so far. I just did the Sync3 conversion to my 2019 base Mustang GT. I have a couple of questions:
1) My reverse camera isn't working, but my park assist is. Any guidance on that?
2) A LC light is staying on my dash screen and Line Lock isn't active.
3) I have tried changing the start up and shut down theme screen with no results. All is have is a Ford logo on both.
Any help is appreciated

TIA,
Chris

Sponsored

 

[Mikepol2]

I ran into similar issues with my Sync 3 swap. Fixing the camera and startup screen was easy with Forscan, just go into APIM (not the APIM as-built) and use the drop-down menus to enable the camera and pick your splash screen. LC is launch control and can be turned off with the steering wheel buttons and dash menus.

 

[FamilymanGT]

I ran into similar issues with my Sync 3 swap. Fixing the camera and startup screen was easy with Forscan, just go into APIM (not the APIM as-built) and use the drop-down menus to enable the camera and pick your splash screen. LC is launch control and can be turned off with the steering wheel buttons and dash menus.

The reverse camera was easy, thank you! I did switch the screen and it worked while I was shutting it down the first time, but it keeps showing the Ford oval. The computer still says ford performance???

 

[FamilymanGT]

Also the line lock and tpms finally reset

 

[Mikepol2]

The reverse camera was easy, thank you! I did switch the screen and it worked while I was shutting it down the first time, but it keeps showing the Ford oval. The computer still says ford performance???

Glad the camera works! The Ford Performance splash screen is the Cobra emblem and “Ford Performance” at startup with the blue oval at shutdown.

 

[FamilymanGT]

Is there a way to change the blue oval too? My buddy is already giving me crap about the Cobra bc it’s not a Cobra...it looks cool though

 

[Mikepol2]

Is there a way to change the blue oval too? My buddy is already giving me crap about the Cobra bc it’s not a Cobra...it looks cool though

Far as I know we’re stuck with the oval. I’m using the FP splash too. And tell your buddy they don’t make Cobras any more so suck it they have specific GT350, 350R and 500 splash screens so install some Ford Performance door sills or hood struts and you’re reppin what you own!

 

[FamilymanGT]

Far as I know we’re stuck with the oval. I’m using the FP splash too. And tell your buddy they don’t make Cobras any more so suck it they have specific GT350, 350R and 500 splash screens so install some Ford Performance door sills or hood struts and you’re reppin what you own!

Lmao!!! I will be doing the good struts soon. He’s a huge Mustang guy, he just likes bagging on me.

 

[StangV6]

Is there a way to change the blue oval too? My buddy is already giving me crap about the Cobra bc it’s not a Cobra...it looks cool though

Have a look in this thread...might help you out:
https://www.mustang6g.com/forums/threads/sync-3-3-ford-evo-startup-shutdown-animation.123911/

Sponsored