Nsinclair
Well-Known Member
- Thread starter
- #1
Hey everyone
I have a 2020gt with a phase 2 roush2650. Using the roush tune.
Today I was on the interstate cruising at 80mph, someone cut me off and I WOT around them. While the car was downshifting from gear 10 to wherever, it bucked pretty hard, the CEL started flashing which I then let off immediately, car drove fine, the light went out after about 1 minute and I haven't had any driving issues. Got home, code reader is showing no codes stored.
I assumed the flashing CEL was a misfire or spark knock or maybe the roush tune is really rich and flooring it at 80mph dumped too much and the cats didn't like it. Any ideas?
Plugs are only 1300 miles old
Running 93 oct from exxon
I did have traction control on(roush dealer asked me that, not sure how that relates)
I have a 2020gt with a phase 2 roush2650. Using the roush tune.
Today I was on the interstate cruising at 80mph, someone cut me off and I WOT around them. While the car was downshifting from gear 10 to wherever, it bucked pretty hard, the CEL started flashing which I then let off immediately, car drove fine, the light went out after about 1 minute and I haven't had any driving issues. Got home, code reader is showing no codes stored.
I assumed the flashing CEL was a misfire or spark knock or maybe the roush tune is really rich and flooring it at 80mph dumped too much and the cats didn't like it. Any ideas?
Plugs are only 1300 miles old
Running 93 oct from exxon
I did have traction control on(roush dealer asked me that, not sure how that relates)
Sponsored
