blankman
Well-Known Member
- Thread starter
- #1
So long story short, bought used steeda plates, bearings are bad, 1 bottom mounting plate is bent. I've gotten a quote on replacement bearings at ~33$ a piece and possibly 35$ for replacement lower plates ( per another forum member). I haven't heard back from steeda yet about the exact price on the lower plates. Its only been 3 days since the email and i am in no rush as im out of work on disability for another couple weeks.
So all in all I'm currently in for ~225$ for the plates, 85$ for replacement spring isolators with bushings and around 3 days worth of time troubleshooting and testing just to isolate the plates as the problem.
I'm not sure if at this point, if it's worth it to replace both bearings in the plates ( I'm still waiting for info from steeda on what the process is), and to replace the bottom plates to reinstall again or just go with a new set of camber plates from MMR or someone else?
If anyone has gone through this process please let me know how it went. Anyone one else i am welcome to your input of thoughts and suggestions on what you would recommend or would personally so yourself? Thanks everyone.
So all in all I'm currently in for ~225$ for the plates, 85$ for replacement spring isolators with bushings and around 3 days worth of time troubleshooting and testing just to isolate the plates as the problem.
I'm not sure if at this point, if it's worth it to replace both bearings in the plates ( I'm still waiting for info from steeda on what the process is), and to replace the bottom plates to reinstall again or just go with a new set of camber plates from MMR or someone else?
If anyone has gone through this process please let me know how it went. Anyone one else i am welcome to your input of thoughts and suggestions on what you would recommend or would personally so yourself? Thanks everyone.
Sponsored
