bmarco
Well-Known Member
- Joined
- Aug 26, 2015
- Threads
- 13
- Messages
- 142
- Reaction score
- 49
- Location
- Kingman, AZ
- Vehicle(s)
- 2016 Ford Shelby GT350
Did a search, looks like it will be very suitable for this application, thanks again !
Sponsored
On the wayAwesome mod OP! I'd definitely like to order a set when you get a new batch in SCS.
Pedal spacers are here for anyone looking for an instant, tailored solutionAwesome mod OP! I'd definitely like to order a set when you get a new batch in SCS.
Just ordered mine! Thanks again!Pedal spacers are here for anyone looking for an instant, tailored solution
https://spacecityspy.com/products/heel-toe-pedal-spacers
1" O.D x 1/4" I.D. x 1/2" length
set of 3
Now in red or black - oOooh
Install guide with photos here:
https://spacecityspy.com/blogs/guides/pedal-spacers-instructions
Hey guys, I realize this thread hasn't seen any action in a minute, but for those that run across this-
If any forum members are still looking to even up their pedals a bit, I have tons of spacers here in my workshop. If you want a turnkey solution, I'm happy to provide. Use the discount code M6G to bring the price to just under $8 (50% off), shipping included anywhere in the US. It was a fun little project, doing a little design work with nylon.
I run these daily and it's a breeze to bridge that now-smaller gap and blip the throttle for a heel-toe downshift.
Awesome man! I was searching online for spacers and found your website, and came on the forum to see if there're any reviews. Very nice!Pedal spacers are here for anyone looking for an instant, tailored solution
https://spacecityspy.com/products/heel-toe-pedal-spacers
1" O.D x 1/4" I.D. x 1/2" length
set of 3
Now in red or black - oOooh
Install guide with photos here:
https://spacecityspy.com/blogs/guides/pedal-spacers-instructions
Is there a way to raise the pedal itself, instead of the whole assembly? I haven't crawled under there to look yet.Never tested this myself. But I think the base of the pedal will touch the handle of the pedal (hence stop the pedal from being pushed in further) before the pedal touches the floor mat of the car. If indeed so then lifting the pedal with spacers won't make the travel any longer.
If you are willing, try pressing the gas pedal down with your hand and see what happens, and report back.
I bet, even without spacers, the handle will contact the base first.