Daily Chat Topic Europe

[Notes]

Probably need coilovers to get it exactly like that

Looks good though, and an option to raise it up again for the inspection

Sponsored

 

[MustangMustHaves]

Exactly! Route I'm going too. I'll hopefully install the Pedders next week. I'll update how they are

 

[Notes]

Exactly! Route I'm going too. I'll hopefully install the Pedders next week. I'll update how they are

Australian coilover kit in Belgium? I hope you don't get in trouble with our friends... whats the plan?

Btw, it doesn't look simple to my as a DIY install, also not sure what you going to do as far as ride height goes. In the video they talk about 6.6cm

 

[John577]

Guys,

Is it me or this actually look like the new 2018 tail lights ?? :eyebulge::eyebulge:

http://www.ebay.com/itm/2015-2016-2...ash=item3f769c7b0a:g:SH4AAOSwfVpYozPE&vxp=mtr

This is the current 2015+ model :

 

[papinist]

:eyebulge:
You are right.. he is in Michigan so probably it comes directly from Flat Rock.. maybe he found it in a trash can
Wonder if it will mechanically fit in our _old_ Mustangs.. of course connector is different for us in EU.

If they will make these with clear tail lights, it will be very hard to install a red vinyl!!

 

[John577]

Yea, first I thought it was a joke or a photoshop picture but no, it's a real picture
As you said, with this kind of tail light, it'll be really hard to put the vinyl on it...

 

[Notes]

:eyebulge:
You are right.. he is in Michigan so probably it comes directly from Flat Rock.. maybe he found it in a trash can
Wonder if it will mechanically fit in our _old_ Mustangs.. of course connector is different for us in EU.

If they will make these with clear tail lights, it will be very hard to install a red vinyl!!

Maybe he works at Flat Rock and couldn't resist to take a pair home...
His description is fishy though, 2015 2016 2017 Genuine Factory Passenger Side LED Taillight and instead showing a driver side picture for the 18 refresh model... this is weird.

I guess our best bet is to wait until the 18 comes out and order a pair of clear taillights, hopefully the sequence drivers are built inside of the unit.

 

[John577]

Maybe he works at Flat Rock and couldn't resist to take a pair home...
His description is fishy though, 2015 2016 2017 Genuine Factory Passenger Side LED Taillight and instead showing a driver side picture for the 18 refresh model... this is weird.

I guess our best bet is to wait until the 18 comes out and order a pair of clear taillights, hopefully the sequence drivers are built inside of the unit.

Maybe it's a trick to not be catch by Ford showing the 2018 tails way before the launch date ...

 

[lemers]

Maybe he works at Flat Rock and couldn't resist to take a pair home...
His description is fishy though, 2015 2016 2017 Genuine Factory Passenger Side LED Taillight and instead showing a driver side picture for the 18 refresh model... this is weird.

I guess our best bet is to wait until the 18 comes out and order a pair of clear taillights, hopefully the sequence drivers are built inside of the unit.

Are you sure the 18s will stay with clear? I don't think clear taillights are a European requirement.

 

[John577]

Are you sure the 18s will stay with clear? I don't think clear taillights are a European requirement.

Yes, someone catched the prototype of the EU Mustang and it has clear tail lights on it.

 

[Notes]

Are you sure the 18s will stay with clear? I don't think clear taillights are a European requirement.

If I recall correctly it has been mentioned in the video interview from a few weeks ago that they are clear.

 

[Ericc B]

That's an amazing find

Too bad it's only one side.

 

[Voodoo077]

If I recall correctly it has been mentioned in the video interview from a few weeks ago that they are clear.

D'oh!:frusty:
Except on the white Mistang the clear look worse than the red ones. What a shame again!

 

[Notes]

Anyone in Bruges with a Black EB, smoked taillights and black pony in the grill? We just passed by a few hours ago... Curious if he/she gets pulled over a lot for it, as it really looked good!

 

[lemers]

Saw a Euro yellow GT on the A6 going through Kaiserslaughtern this morning

Sponsored