Coyote Badges

[z06psi]

What I hope is that they are wide enough to cover the 5.0 holes.

Sent from my SM-N910V using Tapatalk

Sponsored

 

[mustang_guy]

What I hope is that they are wide enough to cover the 5.0 holes.

Sent from my SM-N910V using Tapatalk

Why? They have a panel from ford racing thats 100 bucks with no holes.. It looks better. *edit* nvm youre talking about the fender not trunk panel. Sorry.

 

[Nathanbrummer@SCS]

What I hope is that they are wide enough to cover the 5.0 holes.

Sent from my SM-N910V using Tapatalk

I think that you're talking about the fender holes. If so, this badge will not cover them. The holes are too far apart.

 

[Nathanbrummer@SCS]

I'm digging the blue one.

How will they be made to attach? Solid back for adhesive or epoxy? Clips for snap on installation? Threaded holes or studs for fasteners?

Will they be made of plastic or metal?

Solid back and metal.

 

[UOP Shadow]

Nice work on the coyote logo. If you don't mind a little constructive criticism, I have a suggestion.

Your outlines are way too thin. When you squint or look at the logo from a distance, the top of the coyote's head & the right side disappear. Look at the snake logo from the GT350 you posted. Notice how thick the outlines are. See how much thicker you can make the outlines before you hate the design. Then, make them that thickness.

Also, the dot in the 5.0 logo really gets lost with its outline touching the numbers. If you had spacing between the characters, it would be more recognizable. Even a solid dot would be an improvement.

Like I said, I like what you've done. Thicker lines will make the logo more identifiable from a distance.

 

[Nathanbrummer@SCS]

Nice work on the coyote logo. If you don't mind a little constructive criticism, I have a suggestion.

Your outlines are way too thin. When you squint or look at the logo from a distance, the top of the coyote's head & the right side disappear. Look at the snake logo from the GT350 you posted. Notice how thick the outlines are. See how much thicker you can make the outlines before you hate the design. Then, make them that thickness.

Like I said, I like what you've done. Thicker lines will make the logo more identifiable from a distance.

Good Feedback, Thanks.

 

[OySmallFry@SCS]

if there is a red / black combo I will likely buy one, as long as the price is reasonable. no interest in anything silver on my car.

The antique silver finish is a not a bright, polished silver - it's a darkened silver, closer to the dark portion around the "GT 350" text

I'm digging the blue one.

How will they be made to attach? Solid back for adhesive or epoxy? Clips for snap on installation? Threaded holes or studs for fasteners?

Will they be made of plastic or metal?

As [MENTION=15102]Nathanbrummer[/MENTION] said, they will have a flat back with pre-applied high strength adhesive (3M or equivalent).

And yes metal - a zinc alloy with enamel coloring.

Nice work on the coyote logo. If you don't mind a little constructive criticism, I have a suggestion.

Absolutely! Great feedback, that's exactly why we started this discussion. Let's make a badass coyote badge!

:cheers:

 

[magnum23]

I am interested !!!


Sent from my iPhone using Tapatalk

 

[El_Centenario]

Looking nice, would get one in blue!

 

[hawkbox]

Wife has said this is a necessary mod..I am def in!

 

[5.0 Probie]

I dig them. My first instinct is getting one of every color so I can see which one looks best with RR...

Great feedback in this thread, especially the thickness of the outlines

I also like the idea of the Mustang head...

 

[chace.leahy]

I'm in!

 

[SlowRed]

Sub'd

 

[suckerv]

Sub'd! Looks great so far!

 

[krahooligan]

I will preorder. TAKE MY MONEY!

Sponsored