CFM Breather

[JerseyDevil]

Pic doesn't work

Working on my ipad:shrug:

http://www.teglerizer.com/triumphstuff/emissions/evcvalveinstall1.jpg

Sponsored

 

[Impulsed7]

I've got some of those vacuum check valve exhaust thingys laying around, I may have to plumb that up. I know a few turbo BMW guys that have used them with great success, but make sure to throw a GOOD catch can inline, or you'll have smoke out the ass, literally.

 

[JerseyDevil]

I've got some of those vacuum check valve exhaust thingys laying around, I may have to plumb that up. I know a few turbo BMW guys that have used them with great success, but make sure to throw a GOOD catch can inline, or you'll have smoke out the ass, literally.

If you could run the CNC portion of this breather to a catch can then to the moroso valve plumbed into the downpipe that would be optimum!

 

[Tune+]

Hi Adam

I think there might be typo on there

"2. Request that your idle be raised to 950rpms, this will create less vacuum at idle and will allow the system to move vapor out of the engine easier."

wouldn't the raised idle create more vacuum .

Anyway keep up good work.

Nope, it is accurate as it pertains to the Mustang.

We have done this pcv mod on several of our high hp cars. Moroso makes the check valve and weld in fitting. Properly installed in the downpipe using the Venturi effect this part increases the vacuum on the crankcase under wide open throttle conditions.

To quote Adam,
"Overkill? Yes. Do I care? No. Racecar stuff."

I thought about this as well, but because the crankcase pressure is so high in the Ecoboost Mustang it pushes a lot of oil. It tends to make a lot of smoke when you have a setup like that.

 

[neodark]

Adam, you need to quit coming out with stuff right after I buy things lol. I need to slow down on a bit.

 

[lisandra]

Here is what my breather system will consist of.

http://adamtuned.com/collections/20...lve-catch-can-2015-ecoboost-mustang-smoke-fix

Which I will be modifying to tee into the factory valve cover vent.

Then I already have a CFM unit that was sent to me for testing that I will be deleting the ball out of, modifying the baffle in it, and then connecting it to a secondary catch can.

Overkill? Yes. Do I care? No. Racecar stuff.

I want this

 

[juan_tony1]

Could of sworn my idle stays at 1k what does it normally idle at?? No downpipe/no smoke for me

 

[neodark]

Normal idle is like 750

 

[juan_tony1]

OK probably my tune

 

[Rogues Gambit]

Quick question, how many miles should they be good for before replacing them?

Had mine since the day I got it, gonna hit 8k miles tonight (Getting my date, taking her to dinner, then ??? before we go back to her place) and its pretty dirty

 

[ronv95]

Quick question, how many miles should they be good for before replacing them?

Had mine since the day I got it, gonna hit 8k miles tonight (Getting my date, taking her to dinner, then ??? before we go back to her place) and its pretty dirty

I was unable to find just the filter sold separately cause I have good bit miles on mine as well

 

[Rogues Gambit]

I was unable to find just the filter sold separately cause I have good bit miles on mine as well

http://www.c-f-m.com/performanceparts/pc/Replacement-Filter-for-CFM-Performance-Billet-Valve-Cover-Breather-Kits-186p3760.htm

There ya go man

 

[ronv95]

http://www.c-f-m.com/performanceparts/pc/Replacement-Filter-for-CFM-Performance-Billet-Valve-Cover-Breather-Kits-186p3760.htm

There ya go man

Thanks bro I swore I searched that site all over

 

[Rogues Gambit]

Thanks bro I swore I searched that site all over

Anytime bro :cheers:

 

[Busser48]

Where are you guys getting these cfm breathers??

Sponsored