Bullitt mods

[Bulldog9]

Anyone have a source for 1/2 or 3/4" wheel spacers, or know if you have to trim the lug nuts with the Bullitt rims? I had 1" spacers on the front and looked great, but with a passenger, when I hit larger bumps or dips at speed, the tires would rub the inner wheel well liner.

I'd really like to push the wheels out a bit, but 1" is too much with the lower springs, and I am not ready to buy new shocks/struts.

Sponsored

 

[traxiii]

Here you go under hood picture , there is a rain tray that can be added but I don’t drive in the rain and you can just see the heat coming out the vents as you drive

That's the Cervini GT500 hood?

 

[Bulldog9]

I definitely we t with A LOT of mods which I’m sure most of y’all won’t be very amused with.

Here’s the list:

SUSPENSION:
Steeda IRS Subframe Bushing
Steeda IRS Subframe Alignment Kit
Steeda Hood Struts
Steeda Billet Vertical Links
Steeda Heavy Duty Clutch Lime
Steeda Control Arms
Steeda Rear Toe Links
Steeda Ultimate Dual Rate Lowering Springs
Steeda Bumpsteer Kit
Steeda Camber Plates
Steeda G-Track Brace
Steeda IRS Braces
Steeda Sway Bar
Ford Performance Half Shaft Axles

DRIVETRAIN:
QA1 Carbon Fiber Driveshaft
MGW Short Throw Shifter
Tremec Magnum XL Transmission

APPEARANCE:
Anderson Composites Carbon Fiber Spoiler
MP Concepts Full Diffuser Bumper
MP Concepts Rear Window Louvers
Bullitt Windshield Banner
Steve McQueen Signature
Bullitt Tire Stickers

ENGINE:
Bullitt Whipple Competition Supercharger
Cam Sprockets
Oil Pump Gears
Deatschwerks 95lb Fuel Injectors
Palm Beach Dyno Tune w/E85

EXHAUST:
Corsa Catless Long Tube Headers
Corsa Xtreme Cat-Back

Is that a Bullitt? I'm not sure... ;-) I agree with some of the comments on why to a Bullitt rather than a GT Premium? car looks great though, I'm sure will be a hit at shows.

 

[AnthonyA1234]

Installed my custom radiator plate today

 

[Bulldog9]

I'm looking for a set of Summer Tires and Rims, liking the Shelby CS 11 in Gunmetal or CS 3 in Chrome Powder, Staggered 9 & 11.

The 11's will keep the Bullitt look and is my primary. Anyone running these?

 

[Voo Doo]

Installed my custom radiator plate today

Ok...so this is really, really nice!! It’s like that’s what the raised section is for on the rad cover...
LINK PLEASE...AND IT WILL BE SO FOR 4864! ..

 

[AnthonyA1234]

Ok...so this is really, really nice!! It’s like that’s what the raised section is for on the rad cover...
LINK PLEASE...AND IT WILL BE SO FOR 4864! ..

Haha thanks a lot. I ordered it from the svt store. You order the radiator plate and then they email you asking how you want it. If you want yours to look like mine you could just send them back a screenshot of the pic I posted. Here’s the link

https://www.svtstore.com/customized-vehicle-data-plates-set-of-2/

 

[Voo Doo]

Haha thanks a lot. I ordered it from the svt store. You order the radiator plate and then they email you asking how you want it. If you want yours to look like mine you could just send them back a screenshot of the pic I posted. Here’s the link

https://www.svtstore.com/customized-vehicle-data-plates-set-of-2/

Thanx tons...will do!! I’ll get something a “little different to replace the strut bar plate!! Stay tuned!!
cheers n Beers. Ric

 

[AnthonyA1234]

Thanx tons...will do!! I’ll get something a “little different to replace the strut bar plate!! Stay tuned!!
cheers n Beers. Ric

Yea they’re very good they’ll make it however you want

 

[Voo Doo]

Installed my custom radiator plate today

What’s the smaller plate for?? I’ll try to order a custom Strut Bar plate!!

 

[AnthonyA1234]

What’s the smaller plate for?? I’ll try to order a custom Strut Bar plate!!

When you buy it it comes with 2 plates and you can pick whatever size you want so I bought the large and regular size. I ended up going with the large so I have that smaller one to spare now. I’m sure you could they have a bunch of different sizes meant to go in different places and if not they can also make a custom size for you

 

[Voo Doo]

When you buy it it comes with 2 plates and you can pick whatever size you want so I bought the large and regular size. I ended up going with the large so I have that smaller one to spare now. I’m sure you could they have a bunch of different sizes meant to go in different places and if not they can also make a custom size for you

Order in...we will see what happens with the strut brace too!!

 

[AnthonyA1234]

Order in...we will see what happens with the strut brace too!!

So what’d you end up getting a radiator plate and a new strut tower plate ?

 

[Voo Doo]

So what’d you end up getting a radiator plate and a new strut tower plate ?

Yep!! Maybe it will get Marcie to make more bling!!! reproduce the strut bar plate!! Ya think??

 

[AnthonyA1234]

Yep!! Maybe it will get Marcie to make more bling!!! reproduce the strut bar plate!! Ya think??

Haha very nice dm me pics when you get it!

Sponsored