luke1333
Well-Known Member
- Joined
- Jul 9, 2014
- Threads
- 4
- Messages
- 316
- Reaction score
- 240
- Location
- Cincinnati
- Vehicle(s)
- 2020 Sierra
Thats it then? PP shields, Bullitt calipers and rotors and that is it then?You need the pp rotors
Sponsored
Thats it then? PP shields, Bullitt calipers and rotors and that is it then?You need the pp rotors
Yes, direct bolt on. Brake lines are the same.Thats it then? PP shields, Bullitt calipers and rotors and that is it then?
Cool thanks. Not terrible to then by any stretch! Price or actual work wise!Yes, direct bolt on. Brake lines are the same.
You're also going to need the PP undertray for the brake cooling ducts, and I believe the PP splitter extension also to make it all match up.Cool thanks. Not terrible to then by any stretch! Price or actual work wise!
Not for the rear though correct?You need the pp rotors
Hey, I noticed you have the bullitt Brembos on a GT/CS but different rims.LOL. I’m still torn on doing the rears. I don’t think it looks thaaat bad….
No, I don’t believe I did. I’d prolly test for you this weekend but unfortunately I don’t have a working floor jack :-(Hey, I noticed you have the bullitt Brembos on a GT/CS but different rims.
Did you try the GT/CS rims along with the Brembos, too? Are they having enough clearance?
I want to do the upgrade too, but keep the GT/CS wheels and am unsure whether they will have enough clearance at the front.
Thank you in advance,
Vagabund
Why do people patronize folks, a mistake it is just wrong. If it hurts feelings grow up or turn in the man card.Nice job. Looks great! I would just double check on the rotors, Most would would face other direction while rolling forward. As in your left may be on the right and right on the left if that makes sense. But then again may be how yours are supposed to go. Either way, looks great!!!
correct, all GT's and PP and Mach 1 and Bullitt have the same rears from my limited knowledgeNot for the rear though correct?
Yeah everything worked perfectly! Had on a couple months nowcorrect, all GT's and PP and Mach 1 and Bullitt have the same rears from my limited knowledge
Only spotted the date on your post after I posted! Doh!Yeah everything worked perfectly! Had on a couple months now
No worries!!Only spotted the date on your post after I posted! Doh!
Sir, you ever had any chance since to try whether the GT/CS wheels fit on? Thank you in advanceNo, I don’t believe I did. I’d prolly test for you this weekend but unfortunately I don’t have a working floor jack :-(
I am running the Apex wheels now…. So much nicer looking than the CS wheels ;-)
Check the other post. I posted a link showing them fitting or just Google it and find the answer.Sir, you ever had any chance since to try whether the GT/CS wheels fit on? Thank you in advance