Building A 5.0 Coyote Engine For 1000HP; HorsePower TV

[NoVaGT]

I've been waiting for these guys to get into a built/boosted Coyote motor, and they finally have. Interesting information.

Sponsored

 

[RazzaRossa]

That is freaking nuts. 3.31HP per cu/in from a 5.0!!! I gots to build me one a those. Thanks for posting the link.

 

[RazzaRossa]

The video also is giving me the urge to buy all the cool tools as well. I NEED an inch/lb torque wrench, at least.

 

[jweggy]

Great video! Makes me want to buy this kit. Wonder what a shop would charge to install it?

https://www.modularmotorsportsracin...age=product_info&cPath=4_30_31&products_id=69

 

[jweggy]

..

 

[RazzaRossa]

Big difference is they started with a sleeved block as well, not just the rotating bits. If I'm going to push 1K HP, I'd feel better with the sleeved block, but that's just me.

 

[jweggy]

Big difference is they started with a sleeved block as well, not just the rotating bits. If I'm going to push 1K HP, I'd feel better with the sleeved block, but that's just me.

Good point. If I’m gonna pay the expense to have the motor removed to replace the rotating assembly maybe it makes sense to put in a stronger block.

Any guess as to how much it would cost for replacement of a rotating assembly?

 

[Siege]

I was surprised to see them lock out the cams but I guess it was due to the aftermarket ECU they were running.

I'd expect there is power to be made with that setup with the OEM cam phasers tuned properly.

 

[RazzaRossa]

Any guess as to how much it would cost for replacement of a rotating assembly?

A sleeved Gen 3 Coyote block from L &M $3995
1000 HP rated rotating assembly from MMR $2025
Probably another 5G's for misc. stuff like a proper clutch half shafts etc. My wife says take your estimate and double it, which always seems to be true when I do any project.

Sponsored