3beeps
Well-Known Member
- Joined
- Feb 13, 2016
- Threads
- 37
- Messages
- 911
- Reaction score
- 408
- Location
- Florida
- Website
- www.instagram.com
- Vehicle(s)
- '17 GT
Thanks for the info. Much appreciatedI just wanted to update this thread regarding the Lund boost box omega, I installed my box this weekend and after entering the values from the website it read - 9.657 @ idle which is not accurate. My value for the calculation was 1.01 I also have a GFB II boost controller and plumbed in a mechanical boost gauge for reference, at WOT the readings were as follows :
GFB II = 15.2 psi
Boost box omega = 14.7 -15.25 psi
Mechanical boost gauge = 15.5 psi
So as you can see from the results all 3 are very close in the readings the Lund box may not read accurate at idle but it is accurate under WOT and that's all that matters as I can read vacuum on my GFB II or the PP gauges which read the same 21 - 22 inches at idle.
Was your boost controller showing a steady 15.2 psi while the boost box was fluctuating?
I had the previous model and it used to vary much more wildly than your findings, so that's great news.
Sponsored