Bluemustang
Well-Known Member
- Thread starter
- #31
Thanks man. I've just been following theories that have already been out there. Yes, I'm using the poly Steeda vertical links. Either those or BMRs would be good. However this part is less critical to upgrade than some others.Thanks so much for posting this. I've been looking for an easy to follow suspension plan for my car and thanks to this thread I now think I have one.
Based on your recommendations I'll skipping the diff bushings and only other planned change from yours will be gt350 front and rear sway bars.
Is there anything else you have on the wish list regarding suspension or do you feel this is fairly complete based on your goals?
Oh and just to make sure my list is correct you are using the Poly Steeda Vertical Links?
And did you upgrade to the PP rear toe link or did you find that mod to be unnecessary on a non PP car? No need to answer this since I found @BmacIL state that GT and PP GTs each have the same rear toe link (so much miss information on vendors sites).
I'd put CB005 as #1. Springs and dampers 2 and front and rear control arms/ bearings 3. At least that is what I think after knowing the changes it made.
Sponsored