BC coilover Adjustments

[DeepBlue2016]

Recently purchased a 2016 GT with BC coilovers. It's my first experience with a coilover set up. Looking to raise the car up a bit more than current. Wheels are a 19x10 SVE on all 4. 275x40. Anyone running a similar setup that they are happy with?

Sponsored

 

[strengthrehab]

Your post is kind of all over the place. What exactly are you asking? Your title doesn't have much to do with what is in the body of the message.

I run Pedders coilovers which are the same externally, but valving may be different. I like them and I've increased the rear spring rate from 780 to 1300lb/in and may increase the front to 500 in the future. Also, the ride height is easily changed.

 

[NightmareMoon]

3/4” lower than stock is a good place to be. Not so low you’ll scrape over everything, and low enough to look good and handle well.

 

[DeepBlue2016]

Front seems a tad low.

 

[BmacIL]

Front seems a tad low.

Looks like it needs to come up about 3/8"-1/2".

 

[strengthrehab]

Looks like my car/wheels. Lol

 

[strengthrehab]

Front seems a tad low.

Measuring from the middle of the hub straight up to the fender edge I like mine set to 14.5" which is about 0.75" lower than stock (based on wife's ecoboost).

 

[Bluemustang]

Measuring from the middle of the hub straight up to the fender edge I like mine set to 14.5" which is about 0.75" lower than stock (based on wife's ecoboost).

Agreed. 3/4" drop seems to be the sweet spot.

Sponsored