Barge Board Blockers

[xplotus]

Does anyone know of a foam block for sale or a cover for the channel in the barge boards? They pickup a ton of rocks as a daily so I want to block them off when not at the track. I know someone had then for the GT350R, but not necessarily for the GT500. Yes, Its lame, whatever. Thanks!

Sponsored

 

[2020GT500]

Per your request... https://www.sbfilters.com/jlt/accessories/JLT-RB50020

Another option... http://jaegerbrothersauto.com/auto-... Splash Guards, 2 pc set, Front Only_623.html

I have both options and prefer the splash guards.

 

[xplotus]

Thank you!

 

[Melmark93]

The guys at RokBlokz used the GT350 pattern to cut a 1/2 wider set of flaps to fit the 500.
They don't fall off and scratch up the fender lip like that other brand.

 

[2020GT500]

If I recall correctly, there was some modifications required to add RokBlokz, which was a deterrent for me. Maybe someone else can confirm. I have had no issues with 2k miles of driving with Jager option.

 

[Evolvd]

I started with the JLT foam blocks but the side skirts still gathered dirt and rocks. Now I use the Jaeger Bros flaps and they work great and reduce the amount of collected debris.

 

[rp930]

The JLT’s work for me. Cut way down on the debris. Unnoticeable

 

[Melmark93]

You Jaeger users need to take a look under that gripper area. If you do lose one and can't
get a replacement, what are you going to cover the scratches with? An ABS L bracket
and 3M 5952 VHB tape is all you need for the top mount on the RokBlokz. They mount
with the 3 screws in the GT350 kit and are removable if need be.

 

[Calif-GT500]

The JLT’s work for me. Cut way down on the debris. Unnoticeable

JLT for me as well

 

[Dig-It]

JLT

 

[Evolvd]

You Jaeger users need to take a look under that gripper area. If you do lose one and can't
get a replacement, what are you going to cover the scratches with? An ABS L bracket
and 3M 5952 VHB tape is all you need for the top mount on the RokBlokz. They mount
with the 3 screws in the GT350 kit and are removable if need be.

My fenders are PPF’d and I don’t play “what if” games.

 

[Goose17]

The JLT Rock Blockers will dislodge and turn sideways at higher speeds. To prevent this, I wrapped the outer edge with black friction tape. I have subsequently added the Jaeger Bros flaps, which offer superior protection, especially the hips area by the rear wheels. My PPF protects any marks the flaps might cause.

Sponsored