Anyone log boost with SCT X4

[kcc0521]

Has anyone setup their SCT X4 to log boost? What all did you have to buy to do it and how does it work?

Sponsored

 

[kcc0521]

I purchased the firrier cable (12 bucks from JEGS) and a cheap 3 bar map sensor from eBay for 12 bucks. I will report back how well it works. I need to see if I can add the analog inputs to my config file and log them all.

 

[dubster99]

Let me know how you wire it up. Been thinking about this too, and comparing it to the reading on my mechanical boost gauge. I know SCT has a how-to on their site for adding an analog input.

 

[kcc0521]

Let me know how you wire it up. Been thinking about this too, and comparing it to the reading on my mechanical boost gauge. I know SCT has a how-to on their site for adding an analog input.

It is just three wires that go from map sensor to x4.

 

[dubster99]

It is just three wires that go from map sensor to x4.

So it gets power and everything from the x4?

 

[kcc0521]

Yep power ground and signal wire. I will let you know how it works

Sponsored