About to do my install...Am I missing anything?

[NemesisOfZod]

As it stands, I am almost ready for my install. I am currently awaiting the arrival of my zenclosures 10" rear facing box with amp rack.

I have the following sitting at the house waiting for me:

JL C5-653 3 Way Front stage
JL 10W6v2
JL RD 900/5
JL TWK-88
JL FIX86
KnuKonceptz Kolossus Fleks 4gauge amp kit (4 channel)

Is there anything to be added?

Would I benefit from grabbing a forescan (sp?) and setting everything to flat? That's an extra $100 to shell out, for a one time use kind of thing.

Sponsored

 

[NemesisOfZod]

Crickets...

 

[Boostnonu]

Zip ties

 

[PatrickHenninger]

As it stands, I am almost ready for my install. I am currently awaiting the arrival of my zenclosures 10" rear facing box with amp rack.

I have the following sitting at the house waiting for me:

JL C5-653 3 Way Front stage
JL 10W6v2
JL RD 900/5
JL TWK-88
JL FIX86
KnuKonceptz Kolossus Fleks 4gauge amp kit (4 channel)

Is there anything to be added?

Would I benefit from grabbing a forescan (sp?) and setting everything to flat? That's an extra $100 to shell out, for a one time use kind of thing.

While it won't be of much help to you, if you wanna go halfsies on the Forscan and send it to me when you're done, let me know. ;)

 

[Danman]

Would I benefit from grabbing a forescan (sp?) and setting everything to flat? That's an extra $100 to shell out, for a one time use kind of thing.

Isn't that the reason you bought the Fix? It removes any manufacturer EQ from the signal. I use one with the Twk88 as well.

 

[Boggus]

Find someone local that has the Forscan.

 

[mumbles]

As it stands, I am almost ready for my install. I am currently awaiting the arrival of my zenclosures 10" rear facing box with amp rack.

I have the following sitting at the house waiting for me:

JL C5-653 3 Way Front stage
JL 10W6v2
JL RD 900/5
JL TWK-88
JL FIX86
KnuKonceptz Kolossus Fleks 4gauge amp kit (4 channel)

Is there anything to be added?

Would I benefit from grabbing a forescan (sp?) and setting everything to flat? That's an extra $100 to shell out, for a one time use kind of thing.

How are you planning to integrate the processor with the factory system? You'll need various plugs/splices depending on how you do it.

Sponsored