350R Replica Wheels

[SJulian10mm]

Seems there are at least 2 options for GT350R replica wheels; SVE (Sold by LMR) and RTX (Sold by CJ Pony Parts).

They are both priced similarly, both offered in 19X10 and both flow-formed/similar weights. Any advantage to one or the other? Pros/Cons? Which would you choose? Any others out there beside Project6GRs, which in my opinion are in a separate category due to the aggressive concave design and much higher price.

Sponsored

 

[3er]

Biggest problem with RTX, IMO, is that they don't offer an 11" wide wheel. SVE comes in both 10" and 11" so you have the ability to run wider tires in the rear or even do 19x11s all around w/ extended studs and a 20mm spacer up front.

 

[SJulian10mm]

Whenever and whatever wheels I go with i plan on a 19X10 square settup so not an issue for me. What about RTX quality? lots of people have the SVEs and are happy with them, although not a lot of info on how they hold up on the track bounching on/off curbs etc.

 

[RubyRed PP]

I have the SVE’s in staggered setup (19x10 and 19x11) and love the stance. I’m running 285/35 tires in front and 305/35 in a back and they are perfect. Get TONS of compliments. Some people would like more concave in the back but I think they are just fine. Much better bang for then I k than the project6gr’s.

 

[CEHollier]

Whenever and whatever wheels I go with i plan on a 19X10 square settup so not an issue for me. What about RTX quality? lots of people have the SVEs and are happy with them, although not a lot of info on how they hold up on the track bounching on/off curbs etc.

If your intent is to track the car you may have better luck for recommendations in the Road Course, Track, Autocross, HPDE section.

 

[GT 550]

They have different offsets, SVE 19x10 is 35mm F and RTX is 40mm. Not a huge difference on paper but probably noticeable on the car.

Sponsored