3.48 pulley on pump 93?

[beefcake]

i think its too much boost on pump, with rpm , your gonna see 10lbs or so, which is gonna make 650-700 depending on the setup..

Sponsored

 

[Jordn5.0]

Bumping this one back up. Just installed a 3.4 pully and running 93 with boostane on my Gen 3 10r80. Have you guys had any issues since?

I’m about to do the same - Alejandro video from Lund did it to test but used c16 and 3.33 pulley picked up a 7.2 sec 60-130 time with stock clutch . He said the graph was super clean and didn’t even change tunes

 

[cbrtrx]

I’m about to do the same - Alejandro video from Lund did it to test but used c16 and 3.33 pulley picked up a 7.2 sec 60-130 time with stock clutch . He said the graph was super clean and didn’t even change tunes

C16 is not even close to adding some boostane to 93, just saying. I have a griptech 3.47 pulley if you need one.

 

[markmurfie]

C16 is not even close to adding some boostane to 93, just saying. I have a griptech 3.47 pulley if you need one.

Can you clearify, im not sure what you are saying is better, or easier to use, or what?

 

[cbrtrx]

Can you clearify, im not sure what you are saying is better, or easier to use, or what?

93 with a little boostane added will not have the same benefits as c16, so they should not be compared as the same as to what is safe. When using anything less then a 3.6 pulley the octane starts to become important.

Sponsored