25mm spacers on PP wheels

[Built4Speed]

Where's everyone buying their 20mm spacer?

Sponsored

 

[Built4Speed]

If you want 20mm spacers I have two pairs just sitting in my garage. Two were used, two are brand new.

I'm interested too, PM me if the other person in this thread isn't interested. Sorry to hijack the thread, lol.

 

[66sprint6]

Ok, 20mm installed in all 4 corners. Stock suspension, not lowered.











These are cheapies off ebay but they had the right measurements and when they came in they look just as nice as the namebrand spacers I ran on my Focus ST before this. Either way, I really like the 20mm look...hopefully I will still like them once lowered (which is needs BADLY) but thats down the road a bit.

Matt

 

[JuRuKi]

Should have kept the 25's for the front to match the rear poke but it looks
good!

 

[Tb8983]

I ran 25mm on my pp ecoboost lowered on steeda suspension and had no issues and loved it. I now have new wheels and tires with no spacers

 

[66sprint6]

Should have kept the 25's for the front to match the rear poke but it looks
good!

I actually only have 20mm spacers. The OP and I talked about trading (2) 20mm for (2) 25mm to do just that, but I like the way this looks for now so I think Im gonna stick with the 20mm all around!

Matt

 

[fstenuf]

Matt,

Your car looks good man! What ebay spacers did you go with?

 

[JohnBoyNC]

When I had my 1" spacers on they made the rear pop out like yours and I too thought that they stuck out a tad too much. I too have seen other pics of others' that I though looked like they didnt pop out as much as mine did and wondered why. Can anyone give some insight into why that would be?

I've since then taken them off and ordered new wheels, the M350s and will be having 325s mounted. I've got a little concern about that wide of a tire, especially after seeing what I thought was a difference in my wheels with the spacers. I guess I'll find out on Monday when the wheels and tires get mounted.

I saw a S550 a few weeks ago that had 25mm in the front and 20mm in the rear and I thought that combo looked ideal.

 

[Evolvd]

I had 25mm front and 20mm rear and thought it was perfect. As for the 325s, good luck. I'm running 315s and there's literally millimeters of clearance from the shock and the fender.

 

[66sprint6]

Matt,

Your car looks good man! What ebay spacers did you go with?

These are the ones I went with.

http://www.ebay.com/itm/252337212056?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

Matt

 

[66sprint6]

Those of yall that are/used to run 25mm front 20mm rear, can you post up some pics???

Matt

 

[JohnBoyNC]

I had 25mm front and 20mm rear and thought it was perfect. As for the 325s, good luck. I'm running 315s and there's literally millimeters of clearance from the shock and the fender.

How lowered are you?

 

[JohnBoyNC]

I had 25mm front and 20mm rear and thought it was perfect. As for the 325s, good luck. I'm running 315s and there's literally millimeters of clearance from the shock and the fender.

Are you on 19s or 20s?

 

[blown302]

Matt Did you have to replace or cut wheel studs to run 20mm spacers with pp wheels?

 

[fstenuf]

I guess I'm not crazy...I'm not the only one that has the drivers side wheel poke out a little bit.

I guess this fixes it:

http://www.steeda.com/steeda-s550-mustang-irs-subframe-alignment-kit-2015-all-555-4438/

Sponsored