2022 non-HP to above HP conversion ALL STEEDA

[TRDFurgesson]

Mishimoto brace doesn’t block the oil dipstick!

Sponsored

 

[TrackMeisterWannabe]

Any chance you have your accelerometer numbers for braking before your brake mods? I know you probably haven't bedded your new pads in yet but i would be curious to know what they are once you have.

 

[TRDFurgesson]

Any chance you have your accelerometer numbers for braking before your brake mods? I know you probably haven't bedded your new pads in yet but i would be curious to know what they are once you have.

They seem pretty high, but this was with Steeda two piece rotors and Hawk DTC pads.

 

[TrackMeisterWannabe]

Thanks. A recent thread made me think:

https://www.mustang6g.com/forums/threads/braking-g-force-record.196947/#post-3943231

 

[TRDFurgesson]

I got the cooler brackets worked out thanks to TrackMeisterWannabe

 

[TRDFurgesson]

Porting my throttle body mount.

 

[TRDFurgesson]

Front belly pan and lower splitter are back on.

 

[TRDFurgesson]

Readjusted my alignment tonight. I also changed oil and change the transmission fluid. She took just over 3 quarts to refill the Tremec. It just over 8000 miles and last summer full of track days the transmission fluid was brown… refilled with MERCON LV.

 

[TrackMeisterWannabe]

Go Bobby Go! You going to Mid-Ohio this weekend? Did you get a garage?

 

[TRDFurgesson]

Go Bobby Go! You going to Mid-Ohio this weekend? Did you get a garage?

I did. I have a garage for all three days I believe it’s #4. Building closest to the pagoda.

 

[TRDFurgesson]

Airflow Solutions FINALLY came through. It only took 5 months… but the port job looks fantastic!!!

 

[TRDFurgesson]

Friday was a wet one but good intelligence on the new pavement in the rain.

 

[Roady68]

Airflow Solutions FINALLY came through. It only took 5 months… but the port job looks fantastic!!!

Nice looking piece. What is the expected HP gains?

 

[TRDFurgesson]

Nice looking piece. What is the expected HP gains?

Not sure but the long runners will be great for low to mid range torque production. I have noticed a bump in power with the Comp Cams Stage II Mutha Thumprs. Comes on strong at 3500.

 

[sakman84]

Friday was a wet one but good intelligence on the new pavement in the rain.

New pavement AND wet, much braver than I sir!

Great vid.

Sponsored