2019 B&O upgrade woofer

[StangSteve]

I was wondering if there is a better woofer that can be used in place of the stock one in the trunk for the B&O? Would like a bigger hit from one. Thanks.

Also does anyone know the dimensions of the b&o woofer in the trunk? ohms?

Sponsored

 

[ean611]

Do yourself a favor, and don't just replace the woofer. Do some research on how much you want to deal with this, as there are no "easy" solutions for what you want.

If you just want a different sub, ping Hextall (He's on this forum, also https://www.harnessbyhextall.com/). I don't know if they changed the harness connector for the 2019 over the others, but they'll know.

You'll likely need an amp and woofer, making the stock woofer specs, beyond the depth of the enclosure, not useful. Since the stock enclosure limits you to around 4 inches of depth, you'll be limited in what you can install. A lot of folks have put the Rockford Fosgate p3sd2-8, and some of use the Pioneer ts-sw2002d2. If the enclosure is the same as the Shaker, you could use a Rockford Fosgate PBR300x1 in the stock location, as it'll fit pretty much where the OEM amp is. However, connecting it, you'd want to do more research on how. The stock wiring on my 2016 is enough to power that amp, but I had to make sure I have a 30A fuse in my fuse box. I do not know what the 2019 car has.

The B&O system is very similar to the Shaker system, so do some reading on how that's laid out and decide what you want to do. Remember, quick and "easy" will probably not get you the results you want. Also, when I personally want bass response, the last thing I'd upgrade is the sub, as the midbass is the far bigger culprit most of the time. Finally, the 3.5" drivers (dash, 2x Door) are the most important, as they produce most of what you're listening to, just not bass.

 

[StangSteve]

Thanks ean611 I will do some DD. Im hoping the stock will be good enough for me as I am still waiting for the car to come in but was trying to find things out just in case.

 

[FreedomPenguin]

im not sure, but Id look into a JL sub of any type to put into the enclosure.

 

[13razorbackfan]

Bump...any success?

Sponsored