S550_LGND
Well-Known Member
- Joined
- May 1, 2017
- Threads
- 5
- Messages
- 50
- Reaction score
- 8
- Location
- Fresno, CA
- Vehicle(s)
- 2016 Mustang GT
- Thread starter
- #1
Just Testing the Waters I’m Not In A Rush To Sell. I Have A 2016 Mustang GT “Base” Performance Pack But I Installed Mostly All The Premium Features. I Did The Sync 3 Swap, Digital Dash Cluster & Leather Recaro seats. 1 Owner I Bought the Car Brand New in January of 2016. All Decals In the Pictures Have Been Professionally Removed & The Paint Has Been Repolished And Ceramic Coated Again Where The Decals Were. Here’s A List Of the Mods
Built Motor With Fully Forged Internals Manley Pistons & Heavy Duty Rods With ARP Bolts
MMR Rear Main Seal
Billet OPG’s & Billet Sprocket
ARP Main Studs
Stage 2 Comp Cams Blower Cams
MMR Timing Chain Guides
Upgraded GT350 Timing Chains
Procharger Stage 2 D1X System With Gates RPM Belt, ATI Super Damper And Oil Catch Can
Fore Dual Pump Fuel System Currently Running On E85
Fore fuel Rails
ID1300 Injectors
Lund NGAUGE With 91 & E85 Tunes
Tuned By Lund Racing
American Racing 1 7/8” Long Tube Headers
Corsa Sport Catback Exhaust
Variant Resonators
2018 Intake Manifold Painted Ruby Red
Stage 2 Ben Calimer MT-82
Mantic Twin Disk Clutch
MGW Race Spec Short Shifter
DSS One Piece Aluminum Driveshaft
GForce 2000hp Axles
3.31 Gears
Forgestar F-14 Beadlocks 17x10 Wrapped In Mickey Thompson ET Street R 305-45-17
P-51 Wheels 19x10 Fronts Wrapped In Nitto’s & 19x11.5 Rears Wrapped in Mickey Thompson Street S/S Basically Brand New they Are Also Ceramic Coated.
The Rear Wheel hub Has ARP Wheel Studs With Aluminum 12 Point Lug Nuts
The Entire Car is Protected By A 5yr Ceramic Coat.
Carbon Fiber Ducktail Spoiler
Carbon Fiber Deck Lid
GT350R Alcantera Steering Wheel
There’s A Bunch Of Stuff I Might Of Missed If You Have Any Questions Please Reach Out to Me. For More Pictures You Can See My Instagram @S550_LGND
Motor Only Has About 2,000 Miles Since Being Built. Car Has Around 33K Miles On the Dash. With this Set Up It Should Be Making Over 1000+Whp but I Never Dyno’d. Car is An Overall 9.5/10 shape I Have Well Over $35k In Just Mods Invested In This Car. I’m Looking To Get $50k OBO. Located in Fresno, CA
Built Motor With Fully Forged Internals Manley Pistons & Heavy Duty Rods With ARP Bolts
MMR Rear Main Seal
Billet OPG’s & Billet Sprocket
ARP Main Studs
Stage 2 Comp Cams Blower Cams
MMR Timing Chain Guides
Upgraded GT350 Timing Chains
Procharger Stage 2 D1X System With Gates RPM Belt, ATI Super Damper And Oil Catch Can
Fore Dual Pump Fuel System Currently Running On E85
Fore fuel Rails
ID1300 Injectors
Lund NGAUGE With 91 & E85 Tunes
Tuned By Lund Racing
American Racing 1 7/8” Long Tube Headers
Corsa Sport Catback Exhaust
Variant Resonators
2018 Intake Manifold Painted Ruby Red
Stage 2 Ben Calimer MT-82
Mantic Twin Disk Clutch
MGW Race Spec Short Shifter
DSS One Piece Aluminum Driveshaft
GForce 2000hp Axles
3.31 Gears
Forgestar F-14 Beadlocks 17x10 Wrapped In Mickey Thompson ET Street R 305-45-17
P-51 Wheels 19x10 Fronts Wrapped In Nitto’s & 19x11.5 Rears Wrapped in Mickey Thompson Street S/S Basically Brand New they Are Also Ceramic Coated.
The Rear Wheel hub Has ARP Wheel Studs With Aluminum 12 Point Lug Nuts
The Entire Car is Protected By A 5yr Ceramic Coat.
Carbon Fiber Ducktail Spoiler
Carbon Fiber Deck Lid
GT350R Alcantera Steering Wheel
There’s A Bunch Of Stuff I Might Of Missed If You Have Any Questions Please Reach Out to Me. For More Pictures You Can See My Instagram @S550_LGND
Motor Only Has About 2,000 Miles Since Being Built. Car Has Around 33K Miles On the Dash. With this Set Up It Should Be Making Over 1000+Whp but I Never Dyno’d. Car is An Overall 9.5/10 shape I Have Well Over $35k In Just Mods Invested In This Car. I’m Looking To Get $50k OBO. Located in Fresno, CA
Sponsored
Last edited:
