2015 mustang gt clicking sound

[ManBearPig]

Did another Datalog, still knock is measuring 0's . No up or down. Something isnt let it monitor knock. Can't seem to figure out how to turn it on .

Knock sensor issue you are having is likely completely unrelated to to TB clicking.

Sponsored

 

[ChiTownStang26]

Ya manbearpig is right, if you know someone with a 15-17 try throwing their TB on your car and see if the clicking goes away.

Then your going to have to take off the IM and make sure the knock sensor is connected and wires are not chewed up. If wires look good and all fuses are pushed in(just for good measure) then contact lund(they will be more inclined to help you if you've tried troubleshooting yourself) and see if they have any tips or if they can resend the tune to double check it's not tune related. If all above fails you might want to look into grabbing 2 new sensors but I cant see though how 2 would fail at the same time.

 

[Chad1986]

I have seen both throttle body and purge valve cause similar noise. Just put a set of bunny ears on and put them to the throttle body, and the purge valve, you will hear which one it is very easily. You could also use a screw driver, but bunnt ears will work much better for that. If you don't have you could get from oreillys for about 20 bucks, they come in handy. I do believe that the knock sensor codes are unrelated as well.

 

[therod785]

Ok. So I resolved the knock sensornfaults lmao.

I looked at my stock 15 mani and saw it had some loose cable . It was the knock sensor connection . Confirmed when I removed the 18 mani.

Now off to find out the other problem.

 

[ChiTownStang26]

Haha I knew it!!!!

Sponsored