20" wheels on 2.3

[any_key]

Hi
I want install 20 wheels on mustang 2019 2.3 and I need help.
What a parameters tire and disk needed, to wheels stood neatly in the arch and not rub?
I watched on forum, usually put front tire 265\35\20, rear tire 285\35\20...How much this optimal size? And what need size ET and width disk?
Maybe install rear 295\35? or other size?

Thanks!

Sponsored

 

[m3incorp]

I think they use the same sizes as the wheels that fit the 5.0. The width of the wheel will determine what offset (ET) is needed.

Take a look at this site to get an idea of sizes and widths. I run Velgen wheels, you can go to their site also and find the different widths in a 20 with the correct ET.

My fronts are 20x10 ET +34mm with 285/35r20 tires and the rears are 20x11 ET +52mm with 305/35r20 tires

https://lmr.com/products/mustang-velgen-VFC5-wheels-15-21

 

[Need4SpeedMotors]

Hi
I want install 20 wheels on mustang 2019 2.3 and I need help.
What a parameters tire and disk needed, to wheels stood neatly in the arch and not rub?
I watched on forum, usually put front tire 265\35\20, rear tire 285\35\20...How much this optimal size? And what need size ET and width disk?
Maybe install rear 295\35? or other size?

Thanks!

Hey this is Junior from Project 6GR, regardless if it's a ecoboost or GT the body is the same. We have found for S550 mustang nice flush fitment with no rubbing would be a 20x10 +35 275/35/20, 20x11 +50 305/35/20. Same exact wheel and tire specs are applied to 19" wheels as well. If you have any other fitment questions feel free to give me a call, I would be glad to help!
Here is a photo example of our 19" wheel setup.

 

[any_key]

Hey this is Junior from Project 6GR, regardless if it's a ecoboost or GT the body is the same. We have found for S550 mustang nice flush fitment with no rubbing would be a 20x10 +35 275/35/20, 20x11 +50 305/35/20. Same exact wheel and tire specs are applied to 19" wheels as well. If you have any other fitment questions feel free to give me a call, I would be glad to help!
Here is a photo example of our 19" wheel setup.

What lowering is recommended for this installation?

 

[Need4SpeedMotors]

What lowering is recommended for this installation?

Staying around the 1 inch lowering springs is pretty common for 20" wheels, going lower is still possible but camber adjustments will be needed to slightly tuck the tire under the fenders. With our 19" setup you have more room to lower the car more.

Sponsored