20 inch Wheels

[Voo Doo]

Will order a set of these with Nitto 555 G2’s.......Chrome Powder!! I love the Bling!!! Ford lowering springs as well!!

Sponsored

 

[toplesstripcruiser]

These are nice, I like the classic look. Too bad the fronts don’t come in 10 inch wide. I personally am waiting for the Steve McQueen Bullitt wheels to be available.

 

[CSWC]

What's the minimum recommended tire width on the 20x9.5's?

We typically suggest 275/35 tires, but I believe you can go 255 if you're OK with a little stretch.

 

[Frank Bullitt]

If you like the OEM-style wheels but are looking for a 20" alternative, you might dig our CS11. It's very much in the spirit of the '19 Bullitt wheels!

Do you have these in the Original size 19" ?

 

[Voo Doo]

We typically suggest 275/35 tires, but I believe you can go 255 if you're OK with a little stretch.

What about out back with the 10’s ?

 

[CSWC]

Do you have these in the Original size 19" ?

Currently we only offer it in a 20, but if they take off, other diameters and offsets are definitely a possibility!

What about out back with the 10’s ?

305/30 is ideal on the 11s in the rear, though a 35 sidewall can work depending on your suspension. 295 or 315 track width will work too.

 

[toplesstripcruiser]

What about out back with the 10’s ?

I would say 275 or 285. Maybe 295, not sure. 305 you’re getting into 11 inch wide wheel territory.

 

[Voo Doo]

I would say 275 or 285. Maybe 295, not sure. 305 you’re getting into 11 inch wide wheel territory.

Yes...will be getting the 11’s....my bad, wrong size mentioned in previous post!! So...305’s it is!!

 

[Ericc B]

Those CS11's would be perfect if they had ET30 up front instead of 40.

 

[Voo Doo]

Those CS11's would be perfect if they had ET30 up front instead of 40.

So...do you have a set?? I’m thinking Shelby did a lot of research to get these “just right”.... where do you get your info??? Do you have Magna Ride?? Is your car lowered?? View attachment 356466
@Ericc B

 

[Martinnfb]

in my eyes, they are perfect

 

[Voo Doo]

@Ericc B Watch this video then give us you thoughts once again.... and explain why you think these could possibly need spacers???

 

[Docscurlock]

If you like the OEM-style wheels but are looking for a 20" alternative, you might dig our CS11. It's very much in the spirit of the '19 Bullitt wheels!

Those wheels are sweet!

 

[Voo Doo]

Those CS11's would be perfect if they had ET30 up front instead of 40.

Ericc... pls explain why these now need spacers??? I’d like to know the answer..as would others? You like your wheels poking beyond the wheel wells?? Thanx in advance.

 

[Voo Doo]

Kris. Perhaps now you should tell everyone... our Ford Wheel Lugs will not fit in these C11 holes!!! You must buy aftermarket Lugs... I chose the Black from CJ Pony...after I found out ours don’t fit!!!

Sponsored