2 Memphis 10" m6

[Cathul]

The idatalink harness only fits Mustang with the Shaker system.
For the 6-speaker system (base system) you need a t-harness that directly connects to the ACM.

Sponsored

 

[reju212]

The idatalink harness only fits Mustang with the Shaker system.
For the 6-speaker system (base system) you need a t-harness that directly connects to the ACM.

That’s the one behind the head unit, right?

 

[Cathul]

Yes

 

[reju212]

Was trying to avoid taking the dash apart, but it is what it is.

 

[Cathul]

There‘s no other way unfortunately.
You should think about switching to low level and adding a DSP amplifier when you want to do this.

 

[Bassackwards]

You need an F02. You will want to use Forscan to change the output to preamp and go ahead and ad an amp for the front speakers while you are in there.

 

[reju212]

You need an F02. You will want to use Forscan to change the output to preamp and go ahead and ad an amp for the front speakers while you are in there.

Idk anything about this thing that I've seen referenced to as forscan. I'm pretty sure I've not heard that term used at any of these places that I've spoken to. Crutchfield or any local audio store.

 

[Bassackwards]

Idk anything about this thing that I've seen referenced to as forscan. I'm pretty sure I've not heard that term used at any of these places that I've spoken to. Crutchfield or any local audio store.

Of course not but you'll hear all about it here. Search this forum and you'll learn plenty.

 

[reju212]

I'm not adding an amp to my door speakers. That's not in the plans right now

 

[Bassackwards]

I'm not adding an amp to my door speakers. That's not in the plans right now

You could still use the F02 and prep for the amp that you'll be adding later. Everyone does eventually.

 

[reju212]

You could still use the F02 and prep for the amp that you'll be adding later. Everyone does eventually.

I googled F02, I don’t see anything

 

[Bassackwards]

https://www.crutchfield.com/p_794DSPFO2/iDatalink-dFO2.html?tp=6348

 

[reju212]

https://www.crutchfield.com/p_794DSPFO2/iDatalink-dFO2.html?tp=6348

I already have a t harness being installed, what makes this any different

 

[Bassackwards]

I already have a t harness being installed, what makes this any different

It’s significantly better and allows for future upgrades.

Sponsored