1/4 Mile Fast List 2.0

[Jay-rod427]

Whipple Gen 5 CJ built motor TH400 transmission. Kil-Kare raceway Xenia Ohio. 10/2019 2300 da.

Get that 60' under control and DaMn that thing will be flyin.

Sponsored

 

[RoadCone]

Was a soft launch. Turning it up at Mod Nats!

 

[PrecisionS550]

2017 S550 MT82, Twin turbo, Stock Engine, Oil Pump Gears, Mcleod RST, Fuel System, Mt ET Street R 305/45/17
60-1.51
1/8-6.64
1/8 MPH- 103.95
1/4 ET-10.32
1/4 MPH132.12
Keystone Raceway Park
Not Sure On D/A

 

[Rjames18]

Was a soft launch. Turning it up at Mod Nats!

You running in the 6r80/10r80 class?

 

[RoadCone]

You running in the 6r80/10r80 class?

Heavy Street

 

[NastyPumpkin]

New best today, only if I could’ve hooked my tires (track cold). Last day in Michigan all closed now.

Temp - 42* DA -140

All mods the same as before.

 

[Rjames18]

Heavy Street

Thinking about running in that class as well. I'll need to throw some weight in my car for it though!
See you out there man and good luck!

 

[Jay-rod427]

New best today, only if I could’ve hooked my tires (track cold). Last day in Michigan all closed now.

Temp - 42* DA -140

All mods the same as before.

Your entire front half slowed down, but 1/4 ET picked up. Thank you fall DA!

 

[NastyPumpkin]

Your entire front half slowed down, but 1/4 ET picked up. Thank you fall DA!

Yeah, just to cold to hook on the 60ft.

 

[RoadCone]

Mod Nats at South Georgia Motorspeedway. Getting the front half nailed down! Can I get a bump?

 

[turnswrench]

Mod Nats at South Georgia Motorspeedway. Getting the front half nailed down! Can I get a bump?

Your sig says 8.9, this is a huge improvement over that at an 8.50. Nice and congrats!

 

[80FoxCoupe]

Mod Nats at South Georgia Motorspeedway. Getting the front half nailed down! Can I get a bump?

BA Motorsports crew gettin' it!!!!

 

[bluebeastsrt]

Mod Nats at South Georgia Motorspeedway. Getting the front half nailed down! Can I get a bump?

 

[Stymee]

New best today at Atco Track Rental

+85 DA
MT Drag Radial
BMR IRS Cradle Lockout
H-Pipe
Stock Tune

ET 11.915
60FT 1.870
MPH 118.40

 

[CORNYOTE]

Can I still make the list if I let out? Lol

only run I got in before the stock A10 clutches starting slipping next run.

Still managed a 9.9 I guess lol.


+1600 DA

• Billet oil pump gears and crank sprocket
• Whipple 3.0L stage 2 w/132mm TB / 3.5 griptech pulley
• Texas Speed full length catless headers
• Texas Speed xpipe
• Fore Level 2 fuel system with dual 267’s and filters setup for e85
• Injector Dynamics ID1050x port injectors.
• NGauge programmer
• E85 tune by Lund
• DSS 1400HP halfshafts
• BMR Cradle Bushing Lockout Kit
• BMR Poly Differential Bushings
• BMR Adjustable Upper Camber Links
• BMR front camber plates
• BMR Rear Lower Control Arm Bearings
• BMR Double Adjustable Rear Toe Rods
• BMR Delrin Billet Vertical Links
• BMR Differential Hardware Upgrade Kit
• BMR upper shock mounts
• BMR Driveshaft safety loop
• CCI Driveline one piece aluminum driveshaft
• Steeda progressive 1.25/1” drop Springs
• Viking Warrior adjustable drag shocks on 5/9
• Racestar 18x6/17x10 wheels
• Mickey Thompson - 305/50R17 with front runners

ET 9.90
60FT 1.494
MPH 116.55

Sponsored