wheel

Whats the difference between wheel spacer (hubcentric) 25mm and a aftermarket wheel with a offset of 25mm less than stock? (Same wheel width for both option) For example; 1. Risk for premature failure of the wheelbearing is the same for both options? 2. Suspension feel? 3. Handling? 4. Scrub...

Hey team: I have a 2017 GT without the performance pack. It came with 265/35/20 99W Goodyear tires. I recently lowered the car an inch with the Eibach pro-kit springs and also brought my wheels out an inch with the Billit wheel spacers both in the front and back. I got it done at a shop since...

Hello all. I am new here and have spent some time looking through to find any info I can on where to find good wheels at without much success. First let me start by sharing what I am doing. I have a 2015 Mustang "Hyperstang." I am going full out widebody on it. I know, cutting into the body...

Im planning on running a squared wheel setup and need longer studs to run spacers up front. Ive reached a slight dilema. What is the advantage of the Ford Performance hub assemblies over standard S550 hubs with ARP studs? Is there anything actually better about the ford performance hubs with ARP...

One stop shop for your S550 interior. www.custommods.tictail.com

4 Enthusiasts...By Enthusiasts We are happy to give back to the Mustang6G community offering Project 6GR 10-TEN pre-order discounts + Family Pack gift. Pre-order discount will be valid for any sizes and finish. The family pack will include license plate frame, banner, t-shirt and lug nuts...

I'm putting 1 inch wheel spacers on the back. What have you guys done on the front two so that it is completely flush? Keep in mind I am also lowering the car by 1 inch from stock. :cheers:

www.custommods.tictail.com

ENJOY 17% OFF ENTIRE STORE! USE DISCOUNT CODE: HALLOWEEN LINK:www.custommods.tictail.com

If Ford dropped the ball on anything on the new Mustang, it is the suspension. The stock ride is floaty, there is too much body roll in turns, it sits too high, the infamous wheel hop, and the stock Pirellis are just awful. My 2017 GT Premium non-PP got a suspension makeover, and I still cannot...

For the past few months I've been hearing a chirping noise coming from my front passenger side wheel when I'm in slow traffic. I have Eibach Pro-kit lowering springs installed. I'm wondering if the springs are causing the noise because it is still on the stock strut or if it might be a bad wheel...

I am looking for 25mm (1") hubcentric wheel spacers in good condition, preferably in black. I am in Europe, but let me know if there is anything available and we can discuss shipping.

One 20x10 GT7 wheel satin black w/ center cap. Brand new. $150 Picked up! Local sale near Charlotte. PM me if interested. :ford:

Hey everyone, check out these cool blackout center caps we just got in. These are 54mm in size and should fit all stock wheels for the 2015+. Now available here: https://www.mfautodesigns.com/product-page/blackout-pony-wheel-center-caps

Let's start early, Enjoy 20% off for Mustang6g members! Use discount code: LDAY http://custommods.tictail.com

Good Evening ladies & Gents, We here at PK Auto Design always strive to find new styles and solutions for our enthusiast community. We aim to be the first to present these new products however we also aim to ensure quality above all else. Born out of the ideology of no compromise Vossen...

Good Evening ladies & Gents, We here at PK Auto Design always strive to find new styles and solutions for our enthusiast community. We aim to be the first to present these new products however we also aim to ensure quality above all else. Born out of the ideology of no compromise Vossen...

Good Afternoon ladies and gents, well needless to say 2020 was a unique and rough year, and 2021 looks to be breath of fresh air we all need. As the automotive industry learns to adapt along with the rest of the world the requirement and demands of the consumer have also changed. With these...

Good evening ladies and gents, We have just been informed by our partner warehouse of a HUGE mistake that has occurred. A overstock of XXR X612 wheels have arrived in that we need to get out ASAP. Their mistake is your chance to pickup some clean Mustang Bullet style wheels at a price so...

Hi Guys, I´m trying to find out if the M-3600-M350 Ford Performance part will fit my V6 Automatic? Some vendors say GT, EcoBoost and V6 compatibility, but even Ford Performance is not so sure (they only state GT and EcoBoost on their website description). They were really helpful, but...