mach 1

I’ve had my Mach 1 for over a year now, put 6k miles on her, and she’s started to collect chips in the rear quarter panel. Has anyone installed flaps on the front and or rear tires? What brand? Do they work? Are they aesthetically pleasing? How do they hold up over time? Edit: thanks for the...

Thinking about upgrading from my 2019 Mustang GT Premium (10-speed) to a manual Mach 1 with the handling package and bucket seats. I can afford it either way, but realistically it would be about $15–20k plus my current car’s value. I also got approved for a loan around 4–5%, and I was...

Located a fairly cheap Mach 1 bumper that came bare, and without any inserts. I am currently sourcing parts, and the on thing that I am confused on is the turn signals. I know that I can potentially reuse my GT turn signals, however will the wiring be different? I have heard that I can use...

On my 2021 Mach 1 there is no noticeable difference between the orange and red color setting on the door sill badge. Has anyone else encountered this? It seems to change between all the other colors without issue, but the orange and red settings appear identical.

2023 Mach 1 18k miles Had to tow the ol’ girl yesterday to Ford. I was at a red light and couldn’t get into gear, like the car was fighting me to go into 1st or 2nd. With the engine on, sometimes it was hard to press down on the clutch pedal. Rowed through the gears just fine with the engine...

If anyone was debating on doing the Mach 1 (or the GT500 w/ 5” tips) mufflers for the 4.5” tips..DO IT! Got lucky and picked these up for $350 (Ford Performance wanted $1700 for this exact setup) You can fit it on a stock 18+ diffuser if you shave off some clearance above the tips or it’ll cook...

Selling a set of staggered 19" custom forged wheels by JC Forged Wheels (https://www.jcforgedwheels.com/) with all-season Continental tires and OEM TPMS sensors. Asking $3500. Pickup in Oakville, ON. WHEELS: Style: P-FS101 Mono Colour: Satin Dark Gunmetal Front: 19x9.5 +20 Rear: 19x10 +48...

For sale are OEM parts needed to upgrade your non-handling pack ’21-‘23 Mach 1 to factory handling pack specs. All parts are OEM Ford parts and never have been used or installed. I'm open to shipping or local pick up. Shipping responsibility detailed below. I’m located about 30 minutes north...

Ive been playing with the idea of paint matching mine, to be a little different from most. Not that I dont like the black contrast which is already so good looking. Curious to see if anybody out there has one that's matched. Attached a mock up of what it could look like even though Id try to...

The time has come to let go of my garage queen, I had planed to keep this car for a very long time but plans change and I now need her gone. I'm the second owner purchased 2 years ago from a dealer in Colorado Springs, just ticked 5k miles, only driven on sunny weekends to car shows and date...

Does anyone know of any plug and play mach 1 style grill lights? I have been thinking about doing a mach 1 front end conversion on my car and I've seen that some companies like Tripple7 offer additional aftermarket grill lights to give that old school mustang look. I like the idea, but want to...

I just dropped a new YouTube video of my own version of Ford vs Ferrari

Just like the title says, I am looking for anyone selling any used OEM 2018+ Mach 1 front end parts (bumper cover, top and bottom grills, side vents, upper and lower lips, underbelly pan, inner fender liners, etc. Any color does not have to be perfect just moderate or better condition. If you...

Mach 1 Premium with 17k miles with Tremec Six Speed. Chassis # M0410. Location: Kalispell, MT Stage 1 Whipple with custom dyno tune from EPC Racing in Spokane WA. 651 HP to the wheels. Very safe, reliable and drivable tune. Oversized heat exchanger. Never tracked. Just a fun occasion driver...

Velgen Light Weight Series Classic5 V2 Brushed Titanium 20x10 / 20x11 Limited Finish Have questions? Please PM or email us at [email protected]

DOES NOT INCLUDE CLIPS/SCREWS (accidentally tossed them I think...) I recently installed this kit to add the rear valence, belly pan, and mufflers to my 2019 GT. https://performanceparts.ford.com/part/M-5200-ACT1 It came with the rock guards shown, but I did not need them since I already had...

I recently bought a 2022 Mach 1 at an auction. From what I could tell, the car had only minor damage, with all airbags still intact. However, when the car arrived, I discovered the oil cooler was broken behind the bumper, and the engine was completely dry, which was obviously concerning. I...

Hi All! This is my first post on here after being a lurker for so long! Posted this on the General Forum but @AZ_Ryan recommended I post it over here to potentially get some more traction. Still figuring out how everything works around here. I have had my 2022 Mach 1 Non-HP for a little over...

Hi All! This is my first post on here after being a lurker for so long! I have had my 2022 Mach 1 Non-HP for a little over a year now and I couldn't be more in love with it. I'm planning on throwing some lowering springs on the car and was comparing the Steeda Magneride Sport Springs and...

Hello I just found this forum after an exhaustive search regarding a new SCT BA5000 MAF I put on. It didn’t work and it seems I have to get it Dyno tuned to get the correct tune to run it. I got the X4 Tuner with it. I used the run the older SCT itx but it’s been a while So about me… I rebuilt...