Sponsored

fix

  1. Mustang cohost throwing codes and misfiring with WoT and semi warm IDLE

    Hello everyone I am very new to this forum but I have a 2023 mustang eco boost that is misfiring at WOT and every now and then when I let it sit for an hour or so it’ll misfire like crazy I don’t have a HG leak and I have new packs,injectors,evap purge, fuel low pressure sensor,and plugs yet...

  2. Center dash rattle - help please.

    Hello everyone, I’m having this center dash rattle due to the plastic around the speaker as per the attached video. Usualy it goes away after temperature change. Does anyone know a way of fixing this? What could I do to silence it? I tried putting sound deadening all around the area, but that...

  3. Alignment issues with AC's Carbon Trunk - Advice Needed

    Is there a way I can align this trunk to be a bit more in the centre, unlike the front hood, I can't seem to move the hinges enough to rectify it. Now it rubs on this side and has an ugly gap on the other. Any advice on what I can do to fix it? Thanks! :) Apologies if I posted in the...

  4. Rear driver side RATTLE

    I’ve developed this annoying rattle that comes and goes, its only at a certain rpm that it happens and has been driving me insane. it sounds like its coming from the interior, towards the driver side rear quarter panel/trunk. Anyone else having this issue? 2015 Mustang GT See attached

  5. HELP! Idle Consistently Fluctuating and Causing Hesitation 2016 GT Supercharged

    Car I have a 2016 mustang GT with a Vortech v3 supercharger on it tuned by lund. I have left and right upstream O2 sensors, but no cats, and O2 sensors. The only codes I have are for the missing downstream O2 sensors. I have 3 inch long tube headers with an X pipe that goes to a 2 1/2 inch...

  6. New header’s bent at opening

    Hey all, I just purchased a pair of texas speed 1-7/8 304 stainless steel long tube headers with a off road connection pipe (catless). I received them today and the drivers side header has a minor bent/dent on the opening of the piping which the off road connection pipe fits over. When...

  7. Decklid/Trim Gap Fix

    The dealer I took it to was not interested in rectifying the issue, so I set out to fix it myself. This fix made the gap about 90% better. Still not perfect, but I'm much happier with it now. On my 2016 GT, the rear trim below the decklid is held on with foam adhesive tape and two plastic...





Top