Lonmon
Well-Known Member
- Joined
- Jul 17, 2015
- Threads
- 17
- Messages
- 716
- Reaction score
- 275
- Location
- Mid East US
- Vehicle(s)
- 2018 Mustang GT 10spd Base
- Thread starter
- #1
Here is my 18 GT base 10spd baseline (bone stock) dyno runs. I made 3 runs on the dyno. Blue is in 7th gear (1 to 1). Looks like the stock programming won't allow the car to rev beyond 6k in 7th gear. The green line is 6th and the red line is 5th. Just interesting to see what the curve would look like if it could have made a full pull. I would say its pretty official by now that the 18 makes 420whp and 400wtq bone stock. I also weighed my base auto with only about 2 gallons of fuel in it. I did remove the engine cover and air pump bs in the trunk. Other then that it has no weight reduction. It weighed only 3625!! I would imagine with a half tank it would be more like 3675 or so. Cant wait to do a few weight reduction mods and get it in the 3550 range with a quarter tank for track day. Next will be another dyno once the JLT CAI and Lund tune go on. Can't wait!!
Sponsored