PP2 real life pictures

saleen367 · Jun 7, 2018

activeGT said:
Are the Performance Package 2s on any lots?

Yes, but it takes some searching ...

Bob Moore Ford in OK has one I believe and 2 in Loveland CO that I know of.

Silver Bullitt · Jun 7, 2018

I'd try and get in touch with a Ford rep, and see if they could do anything. I'm guessing you didn't catch it at time of delivery.

Mountain376 · Jun 8, 2018

2018OFPP1?2 said:
Aren't those the EBPP wheels? Doesn't look like a PP2 or a 5.0.

Apex Racing wheels. Look closely as he’s on slicks.

EDIT - Ah, he responded.

Prokiller · Jun 8, 2018

steveespo said:
2018 PPL2 GT, Active exhaust. 5.0 badges removed in 2 minutes, holes filled with 3M rapid cure plastic repair adhesive and razor sliced flush. Graphics and wrap by myself and Rabidwraps. Wheel/tire combo in picture above are Apex 18"x11" EC-7 with Pirelli DH slicks 305/660-18. Oh and that is MAD Industries Carbon GT350R wing on top of an Anderson Composites Carbon/Carbon Decklid, saved 18lbs over stock combination.
Steve

did you try and remove the factory spoiler off the stock decklid first by chance? is there bolt holes in the middle at all?

Cobra Jet · Jun 8, 2018

steveespo said:
2018 PPL2 GT, Active exhaust. 5.0 badges removed in 2 minutes, holes filled with 3M rapid cure plastic repair adhesive and razor sliced flush. Graphics and wrap by myself and Rabidwraps. Wheel/tire combo in picture above are Apex 18"x11" EC-7 with Pirelli DH slicks 305/660-18. Oh and that is MAD Industries Carbon GT350R wing on top of an Anderson Composites Carbon/Carbon Decklid, saved 18lbs over stock combination.
Steve

What roll bar is installed and is it tied/welded to the rear floor pan/frame rail?

steveespo · Jun 8, 2018

There are 5 holes along the back edge of the deck lid, 4 bolt and one alignment hole for the spoiler. I knew going in so I got the AC decklid.

steveespo · Jun 8, 2018

Cobra Jet said:
What roll bar is installed and is it tied/welded to the rear floor pan/frame rail?

Watson Racing 4 point. Rear stays are bolted down over cross member in trunk area, front hoop sits right on the chassis cross rail/bulkhead under the rear seat.
Not an easy install but worth it.

JD_GTPP2 · Jun 10, 2018

Mountain376 · Jun 11, 2018

JD_GTPP2 said:
As mostly promised... My buddy did not show up for the event, so I did not have anyone to film the car from the outside. However, here is the video from my final run (excuse the cursing and the production values as I am a GoPro and YouTube novice).

Car looks pretty well composed! Looking forward to seeing more of these cars on track/autox!

The Governor · Jun 12, 2018

Just picked this up. Can't wait to dive into it!

OH3Cobra · Jun 12, 2018

Wicked in white!

azelmo · Jun 12, 2018

Looks great, welcome to the club!

Scolo · Jun 12, 2018

Nice ride, welcome

Topnotch · Jun 13, 2018

https://www.cars.com/articles/quick...191678212&utm_source=t.co&utm_medium=referral

c-rizzle · Jun 13, 2018

Bingo13 said:
Just picked up my PP2, finally have a stable mate for the GT350.

I've loved to hear some feedback on how the 2 compare from someone who OWNS both. Not just a quick back to back drive, but regular use back to back.

I personally believe if Ford had given the PP2 an A10, it would have put the GT350 "out of business" with too much performance.

PP2 real life pictures

saleen367

Well-Known Member

Silver Bullitt

Well-Known Member

Mountain376

Well-Known Member

Prokiller

Well-Known Member

Cobra Jet

Well-Known Member

steveespo

Well-Known Member

steveespo

Well-Known Member

JD_GTPP2

Well-Known Member

Mountain376

Well-Known Member

The Governor

Member

OH3Cobra

Well-Known Member

azelmo

Well-Known Member

Scolo

Well-Known Member

Topnotch

Well-Known Member

c-rizzle

Well-Known Member