Search results

So that plug is more for them I don’t need it if I am using Lund is that what your saying?

The whipple has a plug for imrc so just don’t use it?

Lund is tuning with RTD

Whipple.

I bought a whiipple 3.0 for 2018-21 I have a 2015. I have iat extender and everything else looks good. Just don’t know what to do with imrc. Do I just cut and make new connections?

So simple solution I have the wrong FN ones Jesus

Tire Pressure Sensor F2GZ1A189AB TPMS35 This what is in the car currently. I had the original one in there and could not get them to work. This is the training tool I bought. Arozk TPMS Reset Tool Sensor Relearn Reset Tool for Ford and Mazda Tire Pressure Monitor System Sensor Programming...

Basically, it says the right-side front and rear are 3 psi. I have new tps sensors oem Ford. I have tried FOrscan reset, factory reset brake ignition 3 times brake ignition 3 times. I have drove car and it does not go into a reset. Had at a shop they could not reset either. Any ideas. Running...

Sounds right. I’ve learned a lot now. Ya you are probably right

There are no abs codes. They way the system works is when the key is turned on it goes through a check to make sure all sensors are working. If it was a sensor or (tire) or something like that when the light is turned off by resetting then once the car is moving the light would come on. When it...

I have a manual thanks

Need real expertise on ABS light. 2015 30k miles Light comes on immediately which means it’s an electrical issue not a sensor or rear hub problem. New front speed sensors Both rear hubs are brand new ABS module is new All fuses checked All relays checked Reset all with FORScan several times I...

Need real expertise on ABS light. 2015 30k miles Light comes on immediately which means it’s an electrical issue not a sensor or rear hub problem. New front speed sensors Both rear hubs are brand new ABS module is new All fuses checked All relays checked Reset all with FORScan several times I...

Ohh ok. A tuner tuned car had to put factory tune back in the car. He tuned car and got a crank re learn code. He could not clear it bc of the ABS light.

The abs light on with wrench. So in order for me to do a crank relearn I must clear the abs light. Car runs normal besides the lights.

2015 GT 30k miles. I have been fighting this issue for about a year now. I replaced both front speed sensors, both rear axle hubs and replaced the ABS module. Checked and replaced the fuses and relays. I am sure its electrical somewhere, but I need help on where to begin. Note when I replaced...

Thanks. I will check those things. As far as FORScan what scan do I do to see code? I have advanced features on there. Is it possible there is slight damage to a rear bearing bc I just remember before I got the car the passenger rear wheel was damaged /bent. Like is said I pulled the tire and...

Well I pulled both rear wheels nothing out of ordinary no movement sensors looked good. No what?

Ohh bet you might be right.

Dunno what’s causing the light. I went ahead and replaced both front abs sensors and still on. Will FORScan tell me and how to do it. Thanks