So I've got the wires all figured out. Putting it on a switch that controls the open/closed functio . I won't be able to do any in-between settings though. It's all on now and sounds pretty good open. I think closed it will sound stock (I have the resonator in still). More to come!
We shall see! I really want to be able to open the exhaust at any time really. I dont think it will be fruitless even if it doesn't make a ton of difference in sound with the second pipe closed as I really like the look and I'll be in it for about 600 installed (mufflers, valance, install)
I have some GT 350 mufflers that I am putting on my GT - I figured out the active exhaust wiring if anyone wants to see.
I should have some videos of it on the car soon!
Hi- does anyone know if the 350 mufflers from a 17 will sit right on a 17 gt? I have a set and will be bringing down to an exhaust shop to be welded in (already put the valance on)
Wanted to see if anyone knows this before I get there and they say it can't be done. Thanks
I think that might depend on how well you can work in the tiny space of the back seat. You would probably have to end up pulling the front seats out so you aren't squished trying to remove it ( I took them out while putting it in). But I do think a complete removal, maybe except the brackets...
Hi, I just finished up installing the Brey Krause bar. If anyone has 10 mins to blow and wants to check it out - here is a link to my video. Thank you. I'm not a pro - but want to share!
I haven't got around to putting mine in yet :( so many mustang projects. I got the 350 mufflers also, so I have to figure out a rig to make them open and close without the stock switch. It doesn't seem like rocket science, just reversing polarities. Good luck with the swap! And I hope the blacks...
I just installed one in my car - here is my unbox and review of the item..I think its a great piece so far, but mentioning the clip in mounts is a big miss by the distributor I got it from
I am trying to use the wiring harness from a donor car and put it on a racing seat for track days. This way the dash lights won’t be on.
I did hook up the wire harness from the donor car after removal. And it now has B0001 and B0002 in my module (hard codes). Tried clearing them with an SRS...
Putting a race seat in for track days and want to wire on the stuff to turn off the dash lights. Just need the wire harness for the driver seat, with any attachments not related to motors and such. Also need the connector off the airbag with purple and yellow wires. If you have one please let me...
Hi-I am putting a Corbeau seat in the 2017 for track days. I want to make sure the driver airbag deploys in case of trouble. I’m concerned with all the harnesses disconnected it won’t blow.
I’ve seen the resistor hack for the bag in the seat. Easy enough to set up.
How about the plug from...
I was thinking about that stitched logo. Mixing trims has always bothered me. But I’m going to put the car on the track and they have the bolsters and airbags. No
Thanks for the info. I did indeed order a racing seat instead. Do you have aftermarket recaros or the ford ones?
I’m actually getting a valance off a gt350 part-out so finding the separate exhaust is on me. I got it for like 160 shipped (damn shipping from Texas to New York!!!) so I have some wiggle room on exhaust
Thank you for all this intel! if I got stock mufflers from a GT350 - do you think they would fit the GT? I see someone has them on eBay for like 350. I would probably be happy with that since I don't want this car too loud.
Does the close out panel do anything? I am going to google it now..but...
Hi - I have the GT350 rear valance on order. It has the fake tips in it. I am planning to put it on my 17 GT Premium.
Any suggestions on an exhaust that will install nicely that is not too aggressive sounding? I am not into the overly loud mustangs (unless they're older)
Anything to watch out...
Hi - I'm Paul, this is my first post here.
I saw the set on eBay, and there is a wrecked GT350 near by.
I was wondering if the GT350 Recaro seats will work in my GT. I ONLY care about the airbags. The heating and cooling and stuff those seats don't have are of no concern. I just want the...