Search results

So I just got done installing my coilover kit and sway bars and didn't see that there was a clearance issue with the Stage 2 crank pulley. Of course it scraped itself up on the sway bar when I started her up. I'll pull the bar off and see how bad it looks, but I'm thinking I need a new pulley...

Hey Guys, anyone running the Pedders coilover setup with an aggressive wheel fitment? I'm trying to get Apex 18x11 ET52s to clear. I'm having a hard time getting the actual wheel to not scrape against the bottom jam nut at full droop. I have a 1" (~25mm) spacer and camber plates that are maxed...

It's not a huge deal on my car, because it's a track toy and will get wrapped. Wouldn't be worth bitching about it to the dealership body shop. However all my plastic body panels are yellowing. Keep in mind this is a 2016 car with 5,900 miles that spends most of it's life in an air conditioned...

Hey Guys, saw a really good write up on this board about wiring up an aftermarket gauge cluster to switched power. I can't find it though, been looking for a few hours and can't remember the key word I used. Does anyone either know a good thread on it or can recommend a good switched power...

Hey guys, just finished another video I thought would be good for DIY here. I realize there are other threads on the Fore Innovations installation, but I thought a video would be helpful. [ame] I got my kit from Hypermotive and it contained the following parts: Fore Innovations 42-800...

So I'm kinda regretting going with the Startlite hose now for my Fore fuel system build. It was super easy to install and I get why people like it for that reason. It's very flexible and the fittings are awesome. However, I didn't think it was going to smell this bad right away. I though I...

Hey Guys, I'm installing a Fore Innovations fuel rail on my 2016 mustang. I have it setup in series which should be fine for my power output. I'm putting the 180 degree slim elbows on the front of the rails and using them to feed in fuel to the rail, cross over via the 90 degree elbows in the...

Has anyone enlarged the opening at the top of the strut tower to access camber plate adjustment on these cars yet? I'm about to throw in some camber plates and they really won't be accessible otherwise without dropping the whole assembly. It doesn't seem like I'd lose anything structural to just...

Hey Guys, Thought you might like a DIY vid on installing Corsa headers on the S550. There are other good videos out there on header installs, so this is probably nothing new, but in case it helps anyone: [ame]

Been having a hard time finding a kit online. Does anyone know of a good AC delete kit for 6g? Or does everyone that deletes AC just remove the belt and call it a day since its aseparate system?

Hey Guys, Been installing my Corsa headers today and I ran into a snag while removing my motor mounts. The bracket that's bolted to the block was easy to remove. However the motor mounts are brutal where they attach to the frame. I knew hitting them from the top was an option and I went for it...

I've always dreamed of having a lift in my garage. There is nothing more frustrating than crawling on the ground in the heat between jack stands bumping your head and getting dirty. BendPak was a brand I was already familiar with and was hoping to find they had a lift that would fit my garage...

Hey Guys, I ran the recommended 5w20 (Mobil 1 Extended Performance) for the first 1,500 miles after my procharger install. Ultimately I became pretty concerned about engine life and performance of the oil with the big jump in power output on top of the Houston heat. I sent off oil samples to...

Hey guys, thought I'd post about something I worked on today. I've been absolutely in love with my ProCharger Stage 2 kit. The power is incredible, but I kept smelling dex-cool. I couldn't really see any leaks, but I had another forum member email me saying his reservoir was leaking. I asked him...

Hey Guys, I put together a list of tire combinations that fit GT PP wheels. This was in part due to my search for street grip for my ProCharged GT PP. I will also be buying a second set of wheels, probably 18s, for running slicks and DOT slicks, I'm still working on that list. What this list...

First of all sorry I know there are a million threads on the procharger system right now, but I don't want to hijack other's threads and my other thread on spark plugs is well solved. I just got my PC Stage 2 installed. I ran it on the highway for a bit to get a few pulls in once the oil...

Hey guys, I'm in the middle of my Procharger Stage 2 install and wondering if I should change out my spark plugs. It looks like a lot of people are running these NGK 6510 plugs. Should I change out my factory plugs to these? If so should I get another tune from Procharger or are they expecting...

Spliced together from someone else's dash cam video, but thought it was funny: https://vimeo.com/191792810

Tried to start the car today, worked fine yesterday. Hit start button, lights come on, computer comes on. Hit the clutch and pushed start again and hear a thud and then nothing, starter doesn't crank. Checked the battery, it's fine. Tried another battery just to be sure, nothing. Car has ~3,000...

So I have the Corsa Xtreme 3" cat-back on my car, which came with an adaptor to the 2.5" factory header/cat piping. This is great, because I wasn't sure which headers I wanted and it made it easier to install without welding or cutting anything up. I've now decided to buy Kooks 1-7/8 headers...