Search results

This thing is really stumping me, hoping someone has an idea or knows a way I can test. I have the MP Concepts LED front turn signals. As you may know, MP Concepts is part of American Muscle so there is absolutely no support. I've tried talking to them and they know nothing about the lights...

Quite a while ago, I messed around using FORScan thanks to the very informed people here and was able to turn on some very hand features. One thing I thought I did correctly was setting up the parking lights as DRLs and even enabling the option to turn them on in the dash settings. Then I...

I've been living with this since the car was new (2015) thinking it might be normal but thought I'd ask. Under very steady light load, between 6 in-Hg and 6 PSI, I get this very constant hissing which sounds like probably the BOV. This is my first tubo car, used to SCs. That will persist until I...

Really need some help for what should be a super simple project. I'm installing MP Concepts turn signals on my 15 Mustang. It's a basic install but I've spent forever on it and can't figure out what's wrong. It's only 3 wires; 1 goes to the headlight connector, and the other 2 tap into the turn...

What is the battery voltage you guys have seen after leaving your car sit over night? Mine is usually around 11.2 - 11.4 seemed to be about the same even when it was warmer outside. I'm concerned there might be some problem and would just like to compare. My concern started from every time I...

I saw this on Facebook without much info. I sure hope this is a new chin and side splitters to go with the Cervini's Stalker kit! I love what it does for the front end! I usually go to Ford Carlisle every year and always visit my friends at Cervini's. This year I couldn't make it but looks like...

I picked up a used SCT X4 to do data logging with. Does anyone know how or if I can log charge air temps (IAT2) with it? At first glance, it doesn't look possible. When I went into monitoring/logging and tried to set the gauges, I could find IAT but not IAT2. I set it up for 8 gauges and was...

Anyone have a good way to monitor engine temp through OBD2 since we don't have an oil temp gauge in the EB? In my PP, there's an oil temp gauge but has no numbers on it, not really sure how much good the thing is. I'd prefer oil temp if someone has come up with a custom PID to add to OBD2...

I got this idea from TheLion and wanted to share some details. The GT350 intake that comes with the Ford Performance Performance Pack for the ecoboost comes with a non-washable paper filter. As it comes time to replace them, you might want to consider other options. Since it is an open element...

I started this journey with a stock 15 Ecoboost with Performance Pack. I'm sure people experience varies by trim. My car was absolutely obnoxious riding down the highway and my commute to work is a little over an hour, all highway. On parts of the road where you couldn't see any imperfections...

For anyone that's done this job, do I have any hope of doing this with the ball joint press I rented? I can't seem to piece parts together to make it work. It seems I like I need different pieces. If I need something else, can you recommend what I should ask for?

Anyone know a good source to find lug nuts for wheel adapters. The only place that I know with a huge selection is Dorman but even they don't have any. They need to be 14mm x 1.5, 60* conical seat and 19mm wrench size. I found a set at Napa Auto Parts that were 14mm x 1.5, 60* conical seat...

Over the weekend, I went to remove my wheel adapters to find they were seized. I saw someone mention something about that a while ago but thought it wouldn't apply to me because my hubs were in great shape, almost new when I put them on and I keep my car very clean. Well it turns our seized...

Does anyone know of any aftermarket wheel center caps that would fit the stock wheels and where to get them? If not, any ideas where I can see a selection of the Ford stock center caps that are available? Thanks!

Was adding another suspension part and just admiring all the Steeda goodies that make my driving so fun! Although I bought the Koni shocks from Steeda, they don't count. How many Steeda parts can you see in the pic? This obviously isn't all of the goodness that makes her corner like a beast and...

I didn't want to ask this in a thread started by a vendor so sorry for duplication. I have the Mishimoto oil separator. It works very well for keeping oil out of the throttle body, I've never had a drop of oil in there. In the other thread the question came up, is a CC like the JLT or Mishimoto...

I asked a couple years ago what the offset was for the Ecoboost PP 19x9" wheel was and was told +45. Now I'm starting to wonder if that answer was really for the GT PP 9" wheel. I noticed people putting 25mm spacers on the GT PP wheels fit different than the EB PP wheels. Is there a way to...

Trying to decide between these 2 and balance between looks, ride comfort, performance and cost. The wheels will be the new MRR M600 19x10" w/35 offset square. I can adjust tire diameter in PCM with tuner. I don't want the tires poking past the fenders. Any opinions/experience? Stock tire...

I went to Cervini's and got my Stalker hood installed to go with the Stalker side scoops, absolutely loving it! I think the lines on the Stalker hood are perfect on the S550. Plus I love the functional scoop and heat extractors. Fit, finish and quality of the hood is just amazing. I got to meet...

Selling my used Roush side scoops. These were ordered pre-painted Magnetic J7 from Roush. They were probably on my car for a year. I absolutely loved these until I saw the Cervini's Stalker scoops so I had to swap them out. I've looked over them carefully and can't see any chips or scratches...