Search results

I have two new OEM GT350 starters (FR3Z11002D) for sale - 1 is in a sealed box and the other was opened to test fit, but never used. Asking 150 shipped for each.

Alright data from the cylinder head cooling mod test is in. To recap, I have water temp sensors installed in the back of both heads in addition to the OEM one (this one is not exposed to water). I then installed the MMR cooling mod with a ball valve so I could turn off water flow and data log...

All parts are off my 2017 GT350 - Calipers: I just finished refreshing them with OEM boots and a new paint job. The calipers were taken down to bare metal with sand blasting and then painted with high temp caliper paint, baked, and then clear coated with a proper 2k top coat. They're not...

I have 8 used and 1 new OEM coils. These would be great as a set of spares for someone who tracks their car. Asking $150 shipped - new cost from White Bear Lake is $69 a coil, so hopefully a decent deal for someone looking for spares :) Also have a set of LU47 injectors with about 45 hours on...

Hi all - Doing some garage clean up. Let me know if you're interested. All prices are shipped. Mishimoto expansion tank bought in 2021. used for about 45 hours on track - no street use. Has some water stains, but otherwise in good condition. Looks like they changed their design, pricing...

Last remaining stock bits are going up for sale. Holler if you are interested. Buyer pays shipping if desired Brand new in box motor mounts. Asking $90 shipped Brand new BMR motor mounts and adjustable brackets. Retail is $260 I think. Asking $200 shipped. Planted seat bracket for...

Alright ladies and gents - got another one for ya'. I was talking to an older gentlemen about road racing a little bit ago and I mented that I've started to look into a trans swap for my GT350 (switching to cross plane). He asked if I had explored dropping in a Jerico/GForce 4 speed since I...

Hi all, Creating a new tear down and build thread for the motor. For those unfamiliar, while pulling the oil pan 2 weeks ago to see if the FPC vibrations had cracked the GT500 oil pickup tube (surprise, it did!), I found a main stud in the bottom of the pan. I decided to put the motor on a...

I need to refresh my clutch this offseason and am looking at options. Would love to reduce the rotating mass if I can. Curious if anyone is running aftermarket clutches on their GT350 and doing a fair amount of road course work? Alternatively, if you've had any issues with aftermarket clutches...

Alright ladies and gents, back with another mystery - it’s been a while, yet it feels sofamiliar :crackup: So in 2019 my starter failed in October…I replaced the solenoid and soldiered on. Fast forward to last week, the starter dies again. Replace the solenoid again, and it works again. Go to...

Does anyone know if you can buy just the starter solenoid? So far I've burnt two out and would love to buy a couple instead of purchasing the entire starter. Anyone got a part #?

Hi all, Figured I'd post this separately from my ongoing thread so it's easily found in searches. Hoping for help with some setup questions. I put on Goodyear 3Rs for the first time this weekend and I was getting some intense understeer in highspeed corners (as seen down below). While I could...

After years of using your typical steel/plywood trailers that come empty, I'm finally in a position to build a custom-spec'd trailer exactly to my needs. I spend about 30+ days a year at the race track (most of which I'm double-duty instructing), so I'm really focused on making my life easier...

Do a complete nut and bolt check before track days. I have a neurotic process for oil changes and track day prep. Was super busy and skipped the last minute nut and bolt check that I do right before putting it in the trailer (I did the post-day one, but obviously that doesn't help with an oil...

Putting these adjustable camber arms up for sale. If you follow my racing adventures, I ended up fatiguing one of the bolts enough to break it after 2 years of really hard track use. FTBR replaced both threaded pieces, so those are brand new. Given my experience, I don’t recommend these for...

Howdy all! Hoping y’all can help me diagnose a hard pedal I was getting on the track. Essentially, every so often I’d get a hard brake pedal after long straight where I spent significant time at wide open throttle. I discovered that if I lifted and let the car coast for 1-2 seconds, the pedal...

Both are lightly used (few hours of track use). MMR Cooling mod comes with upgraded braided hose - runs about $220 new. Looking for $125 shipped!

posted in wrong section

Howdy all, As part of my bi-annual engine rebuild, I am exploring all and any options. Given my recent piston to valve contact and the (4) failed VCT plugs/harness issues I've had, I wanted to explore locking VCT out a bit deeper. Here's what I am learning below: Pros: -Reduce possible...

Was used on a GT350 that was heavily tracked. This item is definitely not pristine. It's got scuff marks and nicks from debris. Perfect for the daily driver or wear item for those that track. Not recommended for those looking to impress at Cars and Coffee. Does not come with hardware. You'll...