Search results

That's a GT350? I'm surprised you have sound insulation on the trunk panels? Only the Rs have nothing?

If you don't want to be reminded about the sandisk brand, you can disable that USB port and have 2 in the console. HC3Z-19A387-B

Unlike the other poster, my experience with EBC has been very poor over the years. I think it's likely their no ceramic pads and rotor combinations were unmatched. Usually leading to pulsating brakes. I recommended them for others and had problems. Nissan, Lexus, Ford. All different cars. Either...

I'm no engineer, but I believe you can. However, having my car racked several times now. There are more optimal positions to put the lift pads.

These are my mods followed by opinion on must or not. I have a 2017 R. Steeda Clutch pedal spring Must - Changes the feel of clutch pedal (still not perfect though) Clutch pedal extension Must - Allows a better seating position (I'm 6'1") 5lbs halotron Extinguisher Must - Personal preference...

Frank lives close to me, hes fixed some carbon on my fcar. He worked with CR early on, does good work.

^ what he said. Do you have picture with trunk closed? I was curious about this mod. What I would really like is a full led headlight and better DRL. :-(

Try holding the left AC vent surround. This is where mine rattles constantly. I've yet to figure out how to fix it. I've placed neoprene tape behind some places but didn't seem to grab the right location.

I used Thomas Sunday - http://www.sundayautotransport.com/ Ohio to San Jose - Enclosed, no issues In my research, I found intercity and reliable carriers to also be highly recommended.

Did you participate or watch the process? I was curious as to how long it took, considering it comes out as a unit like that.

Respectfully, if its not ceramic, It will generate "dust". If you are going to make some compromise, it might as well deliver 100% on something else. my .02

I bought ceramic pads front and rear for my R. I switch back to the OEM Ferodo pads for the track. Almost no discernible braking difference on the street with the ceramic. A month goes by, zero dust on the wheels.

To cover some of the comments. The car didn't appear to have been hit in any way. The only measurable difference I could see was that it was a hot day in full sun. Don't have pix post adjustments, but it was not easy to get clearance without mis-aligning some of the "lines". I managed to get...

Not sure if this has happened to any of you guys. Nothing different about today other than it's full sun and hotter. I went to open passenger door and this fwd edge took the paint right off. :mad:

Drive it everyday, no stripes Get PPF on sides, ahead of rear wheel on quarter panel. That's the part on my car that's gotten ruined. I have 2 sets of wheels, those carbon wheels and track rubber is too pricey to waste on daily driving. Personally, the alcantara in the seats is a...

Sunday at Laguna 5-6.3 mpg. 5x 20 minute sessions. Filled every 2 sessions to 1/2 tank. Ran it to less than a 1/4 tank pulling 1.2gs with no starvation indication.

I looked into the parts manual and saw an "ambient light kit" (CL8Z13E700AA) However, I know for sure you have to change the cup holders to the led ones (GR3Z-6313562-BB) and I dunno what else. It seems implausible to do it cleanly.

Where did you get it? I wanted to have some seat covers embroidered.

https://www.mustang6g.com/forums/showpost.php?p=2117646&postcount=13 I will find knee guards later

Within driving 200 miles on my R I had rock chips on the bumper and lower rear quarters. First time at the track, I had a few tiny marks on the windshield from the adventurous man in front of me. I can confirm suntek has no orange peel, I have a mid hood on the car I installed myself. I would...