Sponsored

Search results

  1. Ohio Weld Belmont Front Runners

    Selling my front runners, going a different route. Used very little on my 2015 mustang gt. My car sat for a couple of months, then I got some quick jacks and the wheels have been off the ground for about a couple more months. Price is lower because I cannot verify if the tires have any flat...
  2. WELD Belmont Question

    I am removing my 18x5 front runners on the 2015 mustang gt. I want to go to a 20x9 or a 20x8, same style wheel. Does anyone know the difference between the two options in the Belmont? Any fitment issues with either?
  3. Ohio 6r80 billet planetary

    If anyone has a billet planetary cheaper than new I might be interested.
  4. 6R80 Rebuild

    I am going to try to rebuild the 6r80, my car has 113k miles, only recently started to slip as it is supercharged so I am thinking the clutches are worn. Does anyone know if upgrading the metal bushings should be something I should try to do? I see sonnax makes a kit.
  5. DSS Axles unknown model

    these axles came off of a gen 2 mustang. I want to put them on my gen 2 but the shafts look identical. There are no part numbers except on a coupler that shows it is a DSS shaft. DSS cannot identify the exact model but they think it is an older 1000hp model. Anyone have ideas on what they are...
  6. Viking Berserker Settings

    I see warrior and crusader settings on here but nothing about berserker. What settings is everyone running and for what purpose?
  7. 2M Steering Shaft For 2015+ Mustangs

    Has anyone tried this? I hate to give 2M more publicity, but I really don't want to take my headers that don't clearance back off. I was thinking this might be an easier method. Thoughts? https://shop.2mfabrication.com/product/2015-mustang-ultra-clearance-steering-shaft?gQT=2
  8. 6r80 Clutch Options (Differences)

    I was just wondering, there are 3 options I am looking at when it comes to upgrading clutches in the 6r80 in my 2015 mustang gt. I am having Finishline performance upgrading them in the near future. Can anyone tell me the difference between the 3 options below? All 3 have different prices which...
  9. Ohio Sold: ESS Boost Starter Kit

    I have a few items I would let go as a package deal or would seperate it. JMS bap 120mm pulley Brand new bottle of boostane professional Let me know if interested, would make a good starter bundle if you purchased an ESS kit without a fuel system $300 takes it all shipped. As long as shipping...
  10. Ohio Sold: Racestar Darkstar Drag Pack

    I have 2 rear wheels in grey that came off my 2015 mustang gt. I went with a different setup. 17x9.5 these also come with the race star special lug nuts and key. I ran a 305/45/17 mt street ss with no problems at all. Nothing wrong with them at all $400 for both prefer local, cbus ohio
  11. Ohio Sold: MMD 551C Charcoal Wheels and NITTO NT555 G2 Tires (Staggered)

    These wheels and tires are hardly used, going with a drag setup now. Fronts are 265 wide and rears are 305 wide nitto G2 tires. Front wheels are 8.5 inch wide and rears are 10. Prefer local buyers but will ship if you are willing to pay shipping. Columbus, Ohio $1100 These brand new over $2k...
  12. GT Sold: MMD 551C Charcoal Wheels and NITTO NT555 G2 Tires (Staggered)

    These wheels and tires are hardly used, going with a drag setup now. Fronts are 265 wide and rears are 305 wide nitto G2 tires. Front wheels are 8.5 inch wide and rears are 10. Prefer local buyers. CBUS ohio $1500 Here is the link of what I got, brand new over $2k. Mine are just like new...
  13. Ohio Sold: Steeda Cold Air Intake

    I have my Steeda CAI for sale since I went supercharger. It has the no-tune required insert with it. Located west cbus area $300
  14. Orange coolant zerex

    Anyone use this stuff instead of motorcraft? Wanting to make sure mixing this with my other orange coolant will not sludge up anything. My current coolant is orange, they are the same color.
  15. Weld Racing Belmont Drag Pack

    Anyone run these? I am trying to see if someone has a pic of these on there car and can't find a pic anywhere. Thanks https://www.lethalperformance.com/weld-racing-belmont-drag-pack-for-2005-2021-mustang.html
  16. Who's got the best wrap?

    Post up your wraps on your S550's! Looking for ideas.
  17. GT350 timing chain on 2015 GT

    Does anyone run the GT350 timing chains on a coyote here? Says on ford performance that they fit. https://accessories.ford.com/products/coyote-gt350-primary-timing-chain-set
  18. Oil pump replace?

    My 2015 gt premium has 112k miles and I am changing opg's and gt350 timing chain and supercharging it. Should I buy the oil pump housing as well or is it not necessary for my miles? Thanks
  19. ATI Balancer

    Looking to go centrifugal SC. 2015 mustang gt auto. Is an ATI worth it? Current miles on car is 110,000 and stock OPG's/CS
  20. *** 4th of July Apparel ***

    Who enjoys Freedom & Boost!? Check out our 4th of July items we have on sale for 7% off! Order yours and receive them before July 4th. Code: FREEDOM7 Find them here: https://www.boostseasonapparel.com/





Top