Search results

You are correct. I installed the MGW shifter for the Mach 1 and GT350’s with the Trenec 3160 trans. My car is a Mach 1. I’m aware that some of the comments were not germane to my specific application but they are interesting to read, nonetheless. As an additional note on my install, I ended up...

I’ve attached a couple videos upshiftingvsnf downshifting but not at high RPM in 5th like in a track environment. Regardless, my shifter doesn’t move at all.

Just replaced the factory shifter in my ‘22 Mach 1 with the MGW gen 2 shifter and I am very pleased with the change. I run my car in track events and was having issues with 5-4-3 downshifts braking into a turn. 3rd gear was not easy to hit and I often found myself back in 5th gear when exiting...

Mishimoto aluminum coolant expansion tank for sale. Tried mounting on my 2022 Mach 1 but it firs too close to my Ford Racing Products oil separator. Will fit 2015-2023 Mustang with smaller and/or round oil separator or none. Includes tank, overflow hose, misc hardware and original packaging. I...

Has anybody had success controlling heat on your Coyote during track use? I expect the Pro charger to run cooler than a Whipple. I run 3-4 weekends per summer in Open track events with 20-30 minute sessions. I’d like the extra hp but concerned about heat management.

It’s sold. Sorry.

Thanks. Not sure how I got that wrong. I hate spellcheck.

Selling my Steeda strut cutting tool. Used once to open up the top of my strut towers for more negative camber. Very little wear. Deleon inner guide does an excellent job keeping the saw blade in place for a very clean cut. $55 shipped (US).

I’ve been competitive road racing (on tracks) with manual shift cars for 34 yrs. The no-lift shift in my ‘22 Mach 1 works exceptionally well and is actually smoother and faster than doing it manually. The auto blip downshifting is nice but I’d prefer doing it myself. Unfortunately, the pedal...

For sale: new, never installed rear tow hook for 2015-2024 S550 Mustang Mach 1, Shelby or GT. $75. Includes two LED strip lights if you’d like to Configure a replacement for your back up light.

Nicely done. Any pics from underneath?

I did not use a nut on the back. The impact bar is very hard metal and difficult to drill. I tapped the hole for threads and used a washer under the bolt. Also used Loctite on the bolt. When towing, the stress is lateral on the bolt, more of a shear resistance issue. I would not install the...

I bought the Ford Racing rear tow hook kit but, when I went to install it, I came across a better idea that was easier to install and allowed me to retain my back up light. After removing the rear diffuser under tray, I was able to view the underside of the rear bumper impact bar. I removed the...