Search results

In case of having access to the plate bolts you might just bent the allen wrench:

What does look so perfect and impressive to you? Sure, and for that reason other big sellers mark it "out of stock" or "shipment may delay" accordingly, BCR doesn't. In my case I had a deadline for delivery and emphasized it beforehand. BCR just ignored it. If you refer to my case, please be...

Thanks for all the writing. Currently I'm interested only to get the refund back to my Zelle account. I asked it a couple of times during the conversation with Beefcakeracing without a result yet. It was 100% this case:

I totally agree that there are a lot of good cases since Beefcakeracing is a large company, though I'm sharing my particular experience which isn't good at all.

I was "lucky" trying to buy BMR IRS support brace CB762H from beefcakeracing.com. The issues started right from the beginning, but I was too optimistic for too long. Now I don't have neither the product nor my money, neither any response from Beefcakeracing. I made the order on March 20. First...

I also have had no issues with these pads on street, but looking at Amazon ratings there is a lot of quality issues: https://a.co/d/01fqMotm Maybe it’s one of those cases

+1 here. Regretting (a little) for ISC N1 coilovers. While I investigated the topic enough, and picked what serves me the best by parameters, still some real life issues have been coming up. One experienced enthusiast friend gave me advice on this topic: to touch the suspension only as the last...

Sure regarding antenna, I use this one: Quectel YB0017AA L1/L5 (suggested in this article: https://rtklibexplorer.wordpress.com/2024/08/01/quectel-lc29hea-with-improved-antenna/). The dongle is plugged into OBDII port, so there's no way to receive good GPS signal there without external antenna...

I got it working with raw CAN bus connection (using OBDLink MX+) and this reference for PIDs: https://github.com/v-ivanyshyn/parse_can_logs/blob/master/Ford%20CAN%20IDs%20Summary.md Here are the screenshots of RaceChrono equations: But the bandwidth isn't good enough, many frames are dropped...

Marry Christmas and Happy New Year comrades! Good news for poor racers like me :) now we can grab good quality logs, not much worse than out of more pricey brandy devices. In the best traditions, we don't buy - we DIY. The pictures above speak by themselves. I may add that the total cost is...

Just for the record, Z26 don’t sustain track use at all. Though no complaints on street

Here's how I see it: The wheel hub has the lip ring extended outside for almost 10mm. So, it contracts the spacer lip thickness making a thin "neck". For spacers much thicker than this hub lip extension there's enough remaining thickness of the "neck", but in my case there's about 2mm of...

Do you have a link to those spacers by chance? Interesting how the center hub looks on Porsche and how it fits into the spacers with their own extended hub.

This moment might be the cause - I torqued them by specs with a torque wrench, but when the car has been dropped on the floor. Maybe at that moment the spacers already cracked.

This is really helpful note, it explains the issue. The manufacturer of my spacers is from China, so they don't worry about these nuances :)

Yes, but from the other side the nuts are cone-shaped, designed to center the wheel

They broke and left in the wheel well. Here's one photo: The black ring is that part of the spacer

Hi comrades. I installed slip-on hub-centric 10mm spacers on the front wheels (after installing appropriate studs). Followed all the guidelines of the most experienced internet commenters (no bolt-ons, etc...) and in result - the spacers broke at the edge of the center hub :/ Both left and...

Here it is

Yes, as I see it exposes two CAN buses. Or that extension cable in case if you’d like to T-cut with your own harness (I chose that option for my use-case)