Search results

Hi guys, Yup... another fuel system question... Curious if anyone can ID these parts of a 2018 rail... If part A is closed up as shown in the diagram, and part B was welded shut.... could this be used on a 2015? Im guessing C could just have a plug installed and it could work... but just...

$200 obo You will need the fuel lines, controlller, and fittings. Perfect for a diy budget return fuel system.

$750 obo Brand new, never installed This is a game changer for the 2011+ Mustang platform when you want to make quick work of the fuel system. This is the most versatile system we have to offer and will accommodate nearly any power adder application out there and not to mention the easiest...

$850 obo Includes billet fuel rails for 18+ Need more fuel for your 2011-2019 Mustang GT? The Sai Li fuel system is the perfect answer. Not only does the SLR fuel system support a bunch of power it's not going to break the bank getting into one. The SLR fuel system uses a modified OEM GT500...

https://www.facebook.com/share/p/1Jrbdhi6AN/ https://www.facebook.com/share/p/1ANGjXnaUr/ Dual pump, dual fpdm , returnless using stock lines Fyi

I picked up a used sai li kit that seems to be in mint condition, with the upgraded fuel rails. Upon inspection I noticed the fittings and line are all 6 AN... Will this be a restriction? Looking to make 800 to the wheels on e85. Stock sealed motor with a roush blower. I noticed many fuel...

With a forced induction 5.0 is there a huge benefit to installing LTH over a cat delete stock header setup?

Got some footage of my runs last night. New PB. 11.15 I did some data logging on my 4th run, probably got some false knock in 3rd and 4th. I think my shifting was ok, some room for improvement, but launching a manual car isn't easy. My goal for the night was a 1.6 60 ft, but the best I...

This was my 2nd time to my local drag strip, 1h north of Austin TX. First time on hoosier quick time pros. First pass I launched at 18 psi cold tires, left around 2000 rpm. 2nd pass was 16 psi and 2500 rpm 3rd pass was 15 psi around 3000 rp. 4th and 5th pass were also at 15 psi and I tried to...

I just measured my air gap and got 12.5mm or half an inch. My setup is Vengeance stage 2 clutch Built mt82 - 2015 Oem throw out bearing Anyone else had to add a shim? I was having some issues with first gear so took it all apart and am rebuilding this hopefully for the LAST time

Replaced my driver side wheel hub the other day. Checked for play and I hear a metal to metal sound when rocking at the horizontal position ( 3 o clock and 9 o clock) with the wheel and tire on. I traced the sound to the knuckle (outboard side) where the toe link is. When I put some pressure...

A while back i saw someone was making these , then disappeared.... Well ive been working on this project almost 2 years, and finally got it done. Here's my link in the for sale section. https://www.mustang6g.com/forums/threads/2015-2017-fog-light-delete-kit-200.217890/

After working on this project almost 2 years, im happy to say I have a working fog light delete kit. 3d printed out of PETG matte black. This will fit ecoboost, v6, and GT models. I think it gives the front end a much more aggressive look. The honeycomb mesh is designed to work with the oem...

I've been working on these the past 2 years. Now they are finally ready for mass production. 3d printed bezels Smoked black automotive paint with 2k clearcoat. Universal fitment on any grille. You can control the lights from Bluetooth on your phone or with a remote control. $150 + shipping...

Brand new Flawless condition 140 shipped

$150 shipped obo All parts installed on a oem mt82 shifter ready for plug and play. You only need to re use the shifter bezel, rubber boot, and shift knob of your choice. This is a nice improvement over the oem shifter. I just installed a barton, and honestly it's not a huge difference imo...

So I picked up a used dss 15-17 driveshaft for my 2015 mt82... it came with the 3 bolts that connect the adapter plate to the trans... but that's it. I was told the oem hardware should work for the adapter plate to driveshaft (4 bolts) but the diameter is definitely off... any idea of what...

Here's a video I put together using the 3d printed repair kit I sell. I hope people that are scared of fixing this issue can follow along and get it fixed up easily! Send me a dm if you're interested in purchasing. It's 25$ shipped.

Cleaned and tested

If anyone has any for sale for a good price lmk. Not looking to pay new prices 15-23 rear calipers , pads, and rotors