I suspected that myself at one point that maybe water was in the tank. It’s definitely the type of feeling when the fuel is bad.
We use 98 shell in Europe, I actually bought an additive a while back to get any water (if any ) out of the tank.
my car has cleared up a lot with the hesitation but...
Someone may be able to add to this but could you hesitation be at the point where port injection switches to direct injection I’m sure it’s around 1500 rpm.
I too get some weird hesitation like when you cruising and you take your foot off the accelerator and when you gently press it you get it...
Cats are fine.
Mine sometimes says it a little hot sometimes too.
I can’t believe you don’t have any misfires at all?.
mine will log between 50-60 misfire events during a drive cycle. Although they don’t register a fault code but the mode 6 always logs some
Hey guys
I’ve had an intermittent problem with my 2020 Bullitt for a while now. Sometimes runs ok but feels a little underpowered and kinda stumbles a little. Other times it’s amazingly quick.
I’ve checked everything and I’m now starting to question the fuel pump…
what’s a decent fuel pump at...
I’m sure many people have said the same. Go for a manual it’s going to completely remove every single problem that everyone is complaining about with the auto.
Forget Lund mate
There are plenty of others that are just as good.
I have a 2020 Bullitt with GPF. First I got a shrader tune which was great and after I got a Steeda tune which is amazing.
You’ll be really happy with the Steeda Tune.
Makes the car run really smooth and a notable difference in low end torque as well.
You’ll need the Sct X4 tuner or similar to download the tune.
I’ve just installed a Flowmaster super 10 in place of the suitcase resonator and it sounds amazing as well.
No worries mate.
Keep an eye on it and remember take the number of misfires on FORScan with a pinch of salt. It’s not 100% accurate but the knock sensors can be very sensitive.
Also one last thing…..
Take the Num of misfires on FORScan with a pinch of salt…
My car car running perfectly and I’ll still log 50-60 misfires during a drive cycle. It will sometimes log knock as a misfire as well.
Hi
Im going to change my brake pads today and I just wondered where these metal plates go in the picture I’ve sent.
do they go between the outside of the pad and the pistons ?.
thanks